T500 Stepper Driver 2.54A, USB, RC & I2C

  • Product Code: 3135
  • Stock

    Warehouse Stock Status Location
    Centurion In Stock U205
    Stellenbosch In Stock F39
  • R220.00 (price excl. VAT)


T500 Stepper Driver 2.54A, USB, RC & I2C

The Tic family of stepper motor controllers makes it easy to add basic control of a bipolar stepper motor to a variety of projects. These versatile, general-purpose modules support six different control interfaces: USB for direct connection to a computer, TTL serial and I2C for use with a microcontroller, RC hobby servo pulses for use in an RC system, analog voltages for use with a potentiometer or analog joystick, and quadrature encoder for use with a rotary encoder dial. They also offer many settings that can be configured using our free configuration utility (for Windows, Linux, and macOS). This software simplifies initial setup of the device and allows for in-system testing and monitoring of the controller via USB (a micro-B USB cable is required to connect the Tic to a computer).

Product Video

Quick Spec

  • Motor driver: MP6500
  • Control interface: USB; non-inverted TTL serial; I2C; RC servo pulses; analog voltage; quadrature encoder
  • Minimum operating voltage: 4.5 V ( Powering the Tic T500 with a supply voltage between 4.5 V and 5.5 V might cause its logic voltage to be lower than normal, which could affect operation)
  • Maximum operating voltage: 35 V
  • Continuous current per phase: 1.5 A (Without a heat sink or forced air flow.)
  • Maximum current per phase: 2.5 A (With sufficient additional cooling.)
  • Maximum step rate: 50000 PPS
  • Microstep resolutions: full, 1/2, 1/4, and 1/8
  • Reverse voltage protection?: Yes

Pin Layout

3135 004

Resources

Shipping List

  • 1 X T500 Stepper Driver 2.54A, USB, RC & I2C
  • 2 X Header Pins
  • 3 X 2-Pin terminals


Tags: t500, stepper, driver, 2.54a, usb, rc, i2c

Also Bought

Gas Solenoid 1/4" 12V

Gas Solenoid 1/4" 12V

Gas Solenoid 1/4" 12V 25V05 Series When working with gas, great care must be taken not to bring the risk of an open spark in contact with the medium. The 25V05 series of gas solenoids was designed..

R120.00

GT2 Belt Clamp - Nylon (2 Pack)

GT2 Belt Clamp - Nylon (2 Pack)

GT2 Belt Clamp The GT2 belt clamp is used with open ended GT2 belt to form a loop. It is manufactured from high strength nylon with a 2mm pitch. Quick Specs For Belt : GT2 Tooth p..

R38.00

GT2 Belt Idler Pulley, Bore 5mm

GT2 Belt Idler Pulley, Bore 5mm

GT2 Timing Belt Idler Pulley Quick Specs Material: Aluminum Alloy Tooth: 20 (T) Pitch: 2 (mm) Bore: 5 (mm) Belt width: 7 (mm) Overall dimensions: D18x9mm Shipping List ..

R49.00

Belt tension spring ( Pack of 4)

Belt tension spring ( Pack of 4)

Belt tension spring ( Pack Of 4 ) Locking Spring Timing Belt Tensioner Will Not Slip Off Keeps 3D Printer Belts Tight To Eliminate Ringing and Slippage Quick Specs Fits All 6mm Wide Belt..

R10.00

10K Potentiometer Module

10K Potentiometer Module

10K Potentiometer Module An adjustable potentiometer can open up many interesting user interfaces. Turn the pot and the resistance changes. Connect VCC to an outer pin, GND to the other, and the cent..

R30.00