Leonardo + Ethernet V2

The Leonardo + Ethernet(V2) is the best decision for creating anything internet-related. The device is created on the bases that the controller can play a role of a fully functional net member. As a net member role, the Leonardo + Ethernet(V2) can gather data from different devices or industrial equipment and send gathered data through local network or internet. The Leonardo + Ethernet(V2) is a fully functional Ethernet-device and can assume the position of server, receive queries from other NET devices and services in local network and internet, and answer those queries. It can also act as self-contained unit, capable of autonomous reaction in response to changes in network, according to planned algorithm.

The board unites two controllers: Leonardo on base of ATmega32U4 microcontroller and Net-controller Ethernet WizNet W5500 TCP/IP with optional function PoE (receiving power directly through Ethernet cable). The Leonardo + Ethernet(V2) is also a HID device. It can be used as a mouse or keyboard on the connected computer, in addition to (CDC) sequenced/COM-port. You can program the controller so that it can control the application on your PC, through remote access or through the internet as a NET device. For example: you can set up an algorithm that turns on your PC, opens and controls applications. The board itself can open Arduino IDE, open sketches and upload it to the board.

Quick Spec

  • Input Voltage (VIN/DC jack): 7~24V
  • Power IN (USB): 5V-limit 500mA
  • Power IN (PoE): 48V(Input), 9V(Output)
  • Digital I/O: 23
  • PWM Output: 7
  • Analog I/O: 12
  • Reserved Pins
    • D4 is used for SD card select
    • D9 is used for SD card detect
    • D10 is used for W5500
    • D14,D15,D16 are used for SPI
    • D8 is used for W5500 interrupting
    • D11 is used for W5500 initialization
  • USB socket: Micro-USB
  • Ethernet socket: RJ45
  • PCB Size: 53.3×68.6mm
  • Card Reader: Micro SD card, with logic level converter
  • Weight: 41g
  • Microcontroller: ATmega32u4(AVR)
  • Operating Voltage: 5V
  • Flash memory: 32KB of which 4KB used by bootloader
  • SRAM: 2KB
  • Clock Speed: 16MHz
  • EEPROM: 1KB
  • Ethernet Microcontroller: Wiznet W5500(Cortex M0)
  • PHY compliance: 10BaseT/100BaseTX Ethernet. Full and half duplex
  • Operating Voltage: 3.3V, 5V I/O signal tolerance
  • Memory: Internal 32Kbytes Memory for Tx/Rx Buffers
  • TCP/IP Protocols: TCP, UDP, ICMP, IPv4, ARP, IGMP, PPPoE
  • PHY Clock Speed: 25MHz
  • PoE: 48V Input, 9V Output

Resources

Shipping List

  • 1 X Leonardo + Ethernet V2


Leonardo + Ethernet V2

  • Brand: Robotdyn
  • Product Code: 6970622936725
  • Stock

    Warehouse Stock Status Location
    Centurion In Stock N7-02
    Stellenbosch In Stock Z2104

    We ship free of charge between branches to complete your order.

  • R589.00 (Inc Tax: R677.35)


Related Products

Leonardo 32U4 +  Ethernet with SD card

Leonardo 32U4 + Ethernet with SD card

Leonardo 32U4 + Ethernet with SD card The Leonardo 32U4 + Ethernet with SD card is created on the bases that the controller can play a role of a fully functional net member. As a net member role,..

Centurion
Stellenbosch

R365.00 (Inc Tax: R419.75)

Leonardo ETH W5500 POE - Active

Leonardo ETH W5500 POE - Active

Leonardo ETH W5500 POE - Active The Leonardo ETH is a fully featured Ethernet-connected device. Depending on your use case, it can act as a server or a net member. In a server role, it will receive r..

Centurion
Stellenbosch

R615.00 (Inc Tax: R707.25)

Arduino Leonardo Original - Micro USB

Arduino Leonardo Original - Micro USB

Arduino Leonardo Original - Micro USB The Arduino Leonardo is a microcontroller board based on the ATmega32u4. It has 20 digital input/output pins (of which 7 can be used as PWM outputs and 12 as a..

Centurion
Stellenbosch

R310.00 (Inc Tax: R356.50)

Tags: leonardo, ethernet, v2, wiznet, w5500, poe, microcontroller, atmel, atmega32u4