Adafruit NFC/RFID Controller Breakout Board
The PN532 is the most popular NFC chip, and is what is embedded in pretty much every phone or device that does NFC. It can pretty much do it all, such as read and write to tags and cards, communicate with phones (say for payment processing), and 'act' like a NFC tag. If you want to do any sort of embedded NFC work, this is the chip you'll want to use!
The PN532 is also very flexible, you can use 3.3V TTL UART at any baud rate, I2C or SPI to communicate with it. This chip is also strongly supported by libnfc, simply plug in an FTDI cable and use the FTDI serial port device to communicate - this lets you do NFC dev using any Linux/Mac/Windows computer! We also include onboard power LED, 3.3V regulator and an FTDI header so you can plug in an FTDI friend or FTDI cable and use with libnfc. Comes with: the PN532 breakout board including a tuned 13.56MHz stripline antenna, 0.1" header, 2 jumpers/shunts and a 4050 level shifter chip. We also toss in a 13.56MHz 1K card!
- Chipset: PN532
- Size: 51 x 117.7 x 1.1mm
- I2C Address: I2C 7-bit address 0x48
- Adafruit Product Page
- Adafruit Product Tutorial
- Adafruit Product Tutorial - PDF format
- PN532 Datasheet
- Nokia introduction to NFC
- PN532 by NXP
- 1 x NFC/RFID Controller Breakout Boards
- 1 x 36 Way Header Strip
- 2 x Jumpers
- 1 x NFC Card 13.56Mhz - 1K
NFC/RFID Controller Breakout Board - 13.56MHz
- Brand: Adafruit
- Product Code: AF364
- Weight: 0.026kg
- Product Status : Active
We ship free of charge between branches to complete your order.
R830.00 (Inc Tax: R954.50)