Black Magic Probe with JTAG + Serial Cable

The Black Magic Probe is a modern, in-application debugging tool for embedded microprocessors. It allows you see what is going on 'inside' an application running on an embedded microprocessor while it executes. It is able to control and examine the state of the target microprocessor using a JTAG or Serial Wire Debugging (SWD) port and on-chip debug logic provided by the microprocessor. The probe connects to a host computer using a standard USB interface. The user is able to control exactly what happens using the GNU source level debugging software, GDB.

AF3839-002

The Black Magic Probe allows you to:

  • Load your application into the target Flash memory or RAM
  • Single step through your program
  • Run your program in real-time and halt on demand
  • Examine and modify CPU registers and memory
  • Obtain a call stack backtrace
  • Set up to 6 hardware assisted breakpoints
  • Set up to 4 hardware assisted read, write or access watchpoints
  • Set unlimited software breakpoints when executing your application from RAM

Quick Spec

  • GDB server port without the need of special PC side software
  • TTL level serial interface
  • SWD and JTAG support
  • Supports 1.7V up to 5V targets
  • Can provide 3.3V to the target (up to 100mA)
  • Semihosting support
  • Works on Linux, Mac and Windows
  • Works with Eclipse and other Integrated Development Environments
  • Supports STM32, LPC11, LM3S - full support list
  • DroneCode compatible
  • Dimensions: 33.1 x 15.5mm
  • Net Weight: 7g

Please note that not all chips/targets are supported. The following chips are supported at this time:

  • STM32 F0, F1, F2, F3, F4, F7
  • Atmel SAMD20/21, SAM3N/S/X/U, SAM4L, SAM4S
  • Nordic nRF51, nRF52
  • NXP LPC8xx, LPC11xx, LPC15xx, LPC43xx
  • TI LM3S, TM4C
  • Freescale KL25, KL27, KL02
  • Xilinx Zynq-7000
  • Broadcom BCM2836 (Raspberry Pi 2)
  • SiLabs EFM32 and EZR32

Resources

Shipping List

  • 1 x Black Magic Probe
  • 1 x JTAG Cable
  • 1 x Serial Cable


Black Magic Probe with JTAG + Serial Cable

  • Brand: Adafruit
  • Product Code: AF3839
  • Weight: 0.007kg
  • Product Status : Active
  • Stock

    Warehouse Stock Status Location
    Centurion In Stock GG159
    Stellenbosch New Product Arriving Soon
    Bulk Location No Stock

    We ship free of charge between branches to complete your order.

  • R1,658.00 (Inc Tax: R1,906.70)


Related Products

JTAG 2.54 to 1.27mm Adapter Cable

JTAG 2.54 to 1.27mm Adapter Cable

JTAG 2.54 to 1.27mm Adapter Cable This is a plug-in adapter for ARM-USB-OCD, ARM-USB-OCD-H, ARM-USB-TINY, ARM-USB-TINY-H which allows borads with small 10-pin 0.05 inch step connector to be programme..

Centurion (No Stock)
Stellenbosch (No Stock)
Bulk Location (No Stock)
Part No: JTAG254-127
Product Status : Active

R149.00 (Inc Tax: R171.35)

Atmel ICE Basic - Original PCB

Atmel ICE Basic - Original PCB

Atmel ICE Basic - Original PCB The Atmel ICE Basic - Original PCB is the cost effective solution for the powerful Atmel-ICE, it adopts the original ATMEL-ICE-PCBA and comes with a durable aluminium a..

Centurion (No Stock)
Stellenbosch (No Stock)
Part No: W15841
Product Status : Active

R1,698.00 (Inc Tax: R1,952.70)

ESP Programmer/Debugger JTAG Board

ESP Programmer/Debugger JTAG Board

ESP Programmer/Debugger JTAG Board ESP-Prog is one of Espressif’s development and debugging tools, with functions including automatic firmware downloading, serial communication, and JTAG online deb..

Centurion (No Stock)
Stellenbosch (No Stock)
Bulk Location (No Stock)
Part No: ESP-PROG
Product Status : Active

R398.00 (Inc Tax: R457.70)

Tags: black, magic, probe, jtag, serial, cable, prog, program. programming, debug