Flat Vibration Switch

  • Brand: Adafruit
  • Product Code: AF4081
  • Stock

    Warehouse Stock Status Location
    Centurion In Stock UR165
    Stellenbosch In Stock 549
  • R18.00 (price excl. VAT)


Flat Vibration Switch

This is a low sensitivity, directional vibration-induced trigger switch. Inside is a very soft spring coiled around a long metal pin. When the switch is bumped from the side only, the spring attached to the first pin touches the center pole to make contact with the second pin. So when there's a bump, the two pins will act like a closed switch. When everything is still, the switch is open. Great for educational projects and wearables!

Compared to most vibration switches, this one is flat, and will solder nicely into a PCB without sticking up, and is also breadboard friendly.

Dimensions

AF4081-003

Resources

Shipping List

  • 1 X Flat Vibration Switch


Related Products

Vibration Module - 0.8g - Size 10x2.0

Vibration Module - 0.8g - Size 10x2.0

Vibration Module - 0.8g - Shaftless Vibration Motor - 10x2mm This tiny, button-type, vibrating motor shakes with a vibration amplitude of 0.75g and draws approximately 60 mA when 3 V is applied to..

R55.00

Vibration Module - 0.8g - Size 8x3.4mm

Vibration Module - 0.8g - Size 8x3.4mm

Vibration Module - 0.8g - Size 8x3.4mm This shaftless vibration motor is fully-enclosed with no exposed moving parts. Its with an 3Volt Vcc @60 mA, small size (8 mm diameter, 3.4 mm height) and shaf..

R73.00

Shaftless Vibration Motor 10x3.4mm

Shaftless Vibration Motor 10x3.4mm

Shaftless Vibration Motor 10x3.4mm This shaftless vibration motor is fully-enclosed with no exposed moving parts. Its with an 3Volt Vcc @60 mA, small size (10 mm diameter, 3.4 mm height) and shaft..

R68.00

Vibration Module - 0.8g - Rubber Noise Absorption

Vibration Module - 0.8g - Rubber Noise Absorption

Vibration Module - 0.8g - Size 11.6x4.8mm - Rubber Noise Absorption This tiny DC motor produces vibrations by spinning an eccentric shaft at over 10,000 RPM when powered at 3 V. Motors like this ar..

R80.00

Tilt sensor(Pack of 2 )

Tilt sensor(Pack of 2 )

The tilt sensor is a component (switch) that can detect the orientation of an object (upright or not). It is equivalent to a pushbutton activated through its physical orientation.  It contains a ..

R20.00

Tags: flat, vibration, vibrate, switch, module, pcb, breadboard, induce, vibration induced

Also Bought

ESP-32 Dev Board (Arduino IDE ready)

ESP-32 Dev Board (Arduino IDE ready)

ESP-32 Dev Board (Arduino & MicroPython Compatible) ESP32 is already integrated antenna and RF balun, power amplifier, low-noise amplifiers, filters, and power management module. The entire s..

R159.00