Adafruit ESP32-S2 Feather BME280 Sensor

The new Adafruit ESP32-S2 Feather comes with an onboard BME280 temperature/humidity/pressure sensor. With native USB and 4 MB flash + 2 MB of PSRAM, this board is perfect for use with CircuitPython or Arduino with low-cost WiFi. Native USB means it can act like a keyboard or a disk drive. WiFi means its awesome for IoT projects. And Feather means it works with the large community of Feather Wings for expandability.

The ESP32-S2 is a highly-integrated, low-power, 2.4 GHz Wi-Fi System-on-Chip (SoC) solution that now has built-in native USB as well as some other interesting new technologies like Time of Flight distance measurements. With its state-of-the-art power and RF performance, this SoC is an ideal choice for a wide variety of application scenarios relating to the Internet of Things (IoT), wearable electronics, and smart homes.

Please note the Feather ESP32-S2 has a single-core 240 MHz chip, so it won't be as fast as ESP32's with dual-core. Also, there is no Bluetooth support.

Quick Spec

  • ESP32-S2 240MHz Tensilica processor - the next generation of ESP32, now with native USB so it can act like a keyboard/mouse, MIDI device, disk drive, etc.
  • Mini module has FCC/CE certification and comes with 4 MByte of Flash and 2 MByte of PSRAM - you can have huge data buffers
  • Power options - USB type C or Lipoly battery
  • Built-in battery charging when powered over USB-C
  • BME280 temperature / humidity / barometric pressures sensor connected over I2C on address 0x77 for immediate ambient weather sensing.
  • LiPoly battery monitor - LC709203 chip actively monitors your battery for voltage and state of charge / percentage reporting over I2C
  • Reset and DFU (BOOT0) buttons to get into the ROM bootloader (which is a USB serial port so you don't need a separate cable!)
  • Serial debug output pin (optional, for checking the hardware serial debug console)
  • STEMMA QT connector for I2C devices, with switchable power, so you can go into low power mode.
  • On/Charge/User LEDs + status NeoPixel with pin-controlled power for low power usage
  • Low Power friendly! In deep sleep mode we can get down to 80~100uA of current draw from the Lipoly connection. Quiescent current is from the power regulator, ESP32-S2 chip, and Lipoly monitor. NeoPixel and I2C are powered from a separate LDO regulator and can be disabled to get lowest quiescent current possible.
  • Works with Arduino or CircuitPython
  • Dimensions: 52.4 x 22.9 x 7.2mm
  • Net Weight: 10g

Resources

Shipping List

  • 1 x Adafruit ESP32-S2 Feather BME280 Sensor


Adafruit ESP32-S2 Feather BME280 Sensor

  • Brand: Adafruit
  • Product Code: AF5303
  • Weight: 0.01kg
  • Product Status : Active
  • Stock

    Warehouse Stock Status Location
    Centurion No Stock D48
    Stellenbosch New Product Arriving Soon
    Bulk Location No Stock

    We ship free of charge between branches to complete your order.

  • R565.00 (Inc Tax: R649.75)


Related Products

BME280 I2C/SPI Temp & Humidity Sensor

BME280 I2C/SPI Temp & Humidity Sensor

BME280 I2C or SPI Temperature Humidity Pressure Sensor Bosch has stepped up their game with their new BME280 sensor, an environmental sensor with temperature, barometric pressure and humidity! This..

Centurion (In Stock)
Stellenbosch (No Stock)
Bulk Location (No Stock)
Part No: AF2652
Product Status : Active

R359.00 (Inc Tax: R412.85)

Wave BME280 Enviro Sensor

Wave BME280 Enviro Sensor

Wave BME280 Enviro Sensor A tiny sensor breakout with BME280 onboard, sensing environmental temperature, humidity, and barometric pressure. It supports both I2C and SPI interfaces, also is compatib..

Centurion (In Stock)
Stellenbosch (In Stock)
Bulk Location (No Stock)
Part No: W15231
Product Status : Active

R276.00 (Inc Tax: R317.40)

BME280 Temp & Humidity Sensor I2C - 3.3V

BME280 Temp & Humidity Sensor I2C - 3.3V

BME280 Temperature & Humidity Sensor I2C - 3.3V The BME280 Breakout Board is the easy way to measure pressure and humidity, and without taking up a lot of room. It gives you easy to solder 2.54..

Centurion (No Stock)
Stellenbosch (No Stock)
Bulk Location (No Stock)
Part No: GY-BME280-33V
Product Status : Active

R194.00 (Inc Tax: R223.10)

SparkFun ESP32 S2 Thing Plus - Qwiic

SparkFun ESP32 S2 Thing Plus - Qwiic

SparkFun ESP32 S2 Thing Plus - Qwiic The SparkFun ESP32-S2 WROOM Thing Plus is a highly-integrated, Feather form-factor development board equipped with a 2.4 GHz WiFi System-on-Chip (SoC), from Esp..

Centurion (In Stock)
Stellenbosch (No Stock)
Bulk Location (No Stock)
Part No: WRL-17743
Product Status : Active

R385.00 (Inc Tax: R442.75)

Tags: adafruit, esp32-s2, feather, bme280, sensor, temp, temperature, humidity, pressure