Qwiic MUX Breakout - 8 Channel TCA9548A

  • Brand: Sparkfun
  • Product Code: BOB-14685
  • Stock

    Warehouse Stock Status Location
    Centurion In Stock UL332
    Stellenbosch In Stock Z2121
  • R189.00 (price excl. VAT)


Qwiic MUX Breakout - 8 Channel TCA9548A

The Qwiic Mux Breakout enables communication with multiple I2C devices that have the same address that makes it simple to interface with. The Qwiic Mux also has eight configurable addresses of its own, allowing for up to 64 I2C buses on a connection. To make it even easier to use this multiplexer, all communication is enacted exclusively via I2C, utilizing the handy Qwiic system.

The Qwiic Mux also allows you to change the last three bits of the address byte, allowing for eight jumper selectable addresses if you happen to need to put more than one Qwiic Mux Breakout on the same I2C port. The address can be changed by adding solder to any of the three ADR jumpers. Each SparkFun Qwiic Mux Breakout operate between 1.65V and 5.5V making it ideal for all of the Qwiic boards.

Product Video

Quick Spec

  • Operating Voltage: 1.65V - 5.5V
  • Operating Temperature: -40 - 85°C
  • I2C Address: 0x70 (default) up to 0x77
  • 9 x Qwiic Connectors

Resources

Shipping List

  • 1 X Qwiic MUX Breakout - 8 Channel TCA9548A


Tags: qwiic, mux, breakout, 8, channel, tca9548a, i2c, multiplexer, bus

Also Bought

SparkFun Qwiic Quad Relay

SparkFun Qwiic Quad Relay

SparkFun Qwiic Quad Relay The SparkFun Qwiic Quad Relay is a unique power accessory board that has been designed for switching not one but four high powered devices from your Arduino or another low p..

R568.00

Screw Terminal Shield V3

Screw Terminal Shield V3

Screw Terminal Shield V3 For Uno The Screw Shield extends all pins of the Arduino out Screw terminals (3.5mm) The 5v power and GND busses has been extended onto the prototyping area. We also added a ..

R85.00

Qwiic JST Connector - SMD - 4-Pin

Qwiic JST Connector - SMD - 4-Pin

Qwiic JST Connector - SMD - 4-Pin Here is a tiny 4-pin Qwiic 1mm JST connector. This connector is used on all of the Qwiic-based boards and can be used to create your own I2C-based device compatible ..

R15.00

Qwiic Cable - Breadboard Jumper (4-Pin)

Qwiic Cable - Breadboard Jumper (4-Pin)

Qwiic Cable - Breadboard Jumper (4-Pin) This is a jumper adapter cable that comes pre-terminated with a female Qwiic JST connector on one end and a breadboard hookup pigtail on the other. This cable ..

R22.00

Qwiic Cable - 100mm

Qwiic Cable - 100mm

Qwiic Cable - 100mm This is a 100mm long 4-conductor cable with 1mm JST termination. It’s designed to connect Qwiic enabled components together but can be used for other applications as well. Each Q..

R33.00