• Description

Chimera Hot End Kit 1.75mm

The Chimera hot end is not manufactured by E3D, but is the generic version. This hot end is a hybrid between the V6 hot end and the All Metal hot end, because it has the sturdy metal structure of the All Metal hot end with a cooling fan and the easy to use internal structure of the J-Head hot end with the high temperature PTFE liner. It uses a fan to constantly blow over the cooling fins to cool down the hot end quickly enough for accurate printing.

It is possible that the hot end might leak plastic at the heater block when it is used for the first time. This is because the nozzle was tightened at room temperature and when the hot end is heated up to printing temperature, a small gap is created between the nozzle and the heat break. To solve this, loosen the grub screw that locks the nozzle (if present) and heat the hot end to printing temperature. Hold the heater block with pliers and tighten the nozzle with a spanner a little bit at a time so that the nozzle seats on the heat break. When done, tighten the grub screw onto the nozzle again.

Quick Spec

• Hotend all metal w/ 0.4mm nozzle for 1.75mm Filament
• Brass Nozzle 0.4mm
• All T6061 Aluminium Core, Tube
• 12V Fan 30 x 30 x 10mm
• Net Weight: 65g

Resources

• Assembly and Setup

Shipping List

• 1 x 3010 12V Cooling Fan
• 1 x Single Input Aluminium Heat Sink
• 1 x V6 Aluminium Block
• 1 x Throat with PTFE Tube inside
• 1 x V6 Brass Nozzle 1.75/0.4mm
• 1 x PTFE Straight Through Quick Connector
• 2 x Fixed Screws

Chimera Hot End Kit 1.75mm

• Brand: Generic
• Product Code: CHIM-HOT-175
• Weight: 0.065kg
• Product Status : Active

Stock

Warehouse	Stock Status	Location
Centurion	No Stock
Stellenbosch	In Stock	Z3128
Bulk Location	No Stock

We ship free of charge between branches to complete your order.

• R228.00 (Inc Tax: R262.20)