Servo Large 25kg.cm with Feedback

  • Brand: Generic
  • Product Code: DS3225-270-FB
  • Stock

    Warehouse Stock Status Location
    Centurion Out Of Stock CX2-06
    Stellenbosch Out Of Stock Z4043
  • R289.00 (price excl. VAT)


  • 5 or more R249.00

Servo Large 25kg.cm with Feedback

The DS3225-270-FB is a high quality digital servo with metal gears with feedback.  The servo has 270 deg operating angle. The feedback is an analog output and can be used  to get the servo's position. That information can be used in robotics to improve stability or even allow 'recording' of servo motion.

Quick Spec

  • Torque:25kg/cm @ 6.8V
  • Weight:60g
  • Operating Angle: 270deg
  • Size:40 X 20 X 40.5mm
  • Speed:0.15sec/60° @ 4.8V
  • Operating Voltage:4.8-7.2Volts
  • Operating Current:80 - 100mA
  • Idle Current: 4mA
  • Horn Spline Type : 25T
  • Dead Band Width: 3μs
  • Pulse width range: 500→2500 μsec

Pin Outs

DS3218_270_FB_002

Shipping List

  • 1 x Servo Large 25kg.cm with Feedback
  • 1 x Servo Arm 25T
  • 1 x Servo Disk 25T
  • 4 x Screws

Tags: servo, 25kg.cm, feedback, DS3218-270-FB, DS3218

Also Bought

180 Piece Rubber Grommet Kit

180 Piece Rubber Grommet Kit

180 Piece Rubber Grommet Kit Grommets are used when holes are drilled through which wires must pass to protect the wire from damage by rough edges. Shipping List 40 X 1/4" 40 X 5/16"..

R115.00

Mega 2560 R3 - 16MHz 5V - Compatible with Arduino®

Mega 2560 R3 - 16MHz 5V - Compatible with Arduino®

Mega R3 2560 - 16MHz 5v - Compatible with Arduino® The Mega 2560 R3 is a microcontroller board based on the ATmega2560. It has 54 digital input/output pins (of which 14 can be used as PWM outputs),..

R269.00

Stepper Motor, 1NM, NEMA23

Stepper Motor, 1NM, NEMA23

Stepper Motor, 1NM, NEMA23 - 57BYGH420 The Wantai 57BYGH402 is a high-torque 1NM stepper motor with a 1.8° step angle. The motor has four color-coded wires and can be controlled with any of our mi..

R349.00

Stepper Motor 0.5Nm NEMA17 0.9 deg/step

Stepper Motor 0.5Nm NEMA17 0.9 deg/step

Stepper Motor, NEMA17, Torque 0.5NM 0.9 deg/step Where most stepper motors offers a 1.8deg/step the 42BYGHM809 offers 0.9 deg/step. Product Video Quick Spec 0.5Nm (48N.cm) - 4 Wire ..

R258.00

Coupler Shaft Flexible 6.35 x 8mm

Coupler Shaft Flexible 6.35 x 8mm

Flexible Shaft Coupler 6.35x8mm These couplers are made of machined aluminum and have a spiral cut that makes them slightly flexible so they can be fit to two shafts even if they are not perfectly ..

R39.00