Stepper Motor 14Nm + FYDB808T + 500W PSU Kit

This CNC Kit takes the hassle of figuring out all to use to get started with your own simple CNC machine. The kit consists of the FYDB808T stepper driver, the Nema 42 Stepper motor (14nm), a beefy 500W Toroidal Transformer, and a spider jaw coupler.

FYDB808T Stepper Driver

The drive has multiple protection functions such as: overcurrent, overvoltage, undervoltage, short circuit protection.
Low noise: Digital-analog combination method and advanced power angle closed-loop control technology, effectively suppressing noise and vibration of the motor at low speed.

High efficiency: the latest 32-bit DSP control technology to achieve the best output performance of the motor.
Large speed range: optional stepper motor, up to 3000rpm.
Suitable for a variety of automation equipment and instruments in the field of motion control, such as: electronic equipment, semiconductor equipment, laser cutting and welding, packaging machinery, engraving machines, CNC machine tools, automated assembly equipment.
Interference frequency filtering: photoelectric isolation differential signal input, impulse response frequency up to 250Kpps



PLEASE NOTE

  1. SW5 sets the motor rotation direction: OFF = reverse direction rotation, ON = positive direction rotation. SW6 sets the load inertia: OFF = low inertia, set to ON = high inertia.
  2. Do not reverse the power supply. Do not exceed the input voltage of DC110V/AC80V. The green indicator light PWR lights when the drive is powered.
  3. The input control signal voltage is 5V. When it is higher than 5V, the current limiting resistor needs to be connected. When the control signal voltage is 24V, a 2.2K 1/4W resistor should be connected in series.
  4. The driver has a single and double pulse selection function, which can be selected by internal shorting bar. The factory default is pulse + direction.
  5. When installing the motor, it is strictly forbidden to strike the motor shaft and the back cover to avoid damage to the encoder. Please connect the motor and encoder wiring correctly to the drive.

Quick Spec

  • FYDB808T Stepper Driver
    • Model: FYDB808T
    • Voltage: DC48-110V, AC48-80V
    • Drive current: 2.4~7.2A/phase (auto adjust)
    • Subdivision: the highest resolution 51200 steps / rev 16 level adjustable
    • Maximum pulse frequency: 250 Kpps
  • Stepper Motor 14Nm
    • Model Name: FY110EM600A
    • Step Angle: 1.8deg
    • Step Angle Accuracy: ±5% (Full step, no load)
    • Resistance Accuracy: ±10% (20°C)
    • Inductance Accuracy: ±20% (1KHZ)
    • Temperature Rise: 80°C Max (Rated current, 2 phase on)
    • Ambient Temperature: -20°C ~ +50°C
    • Insulation Resistance: 100MΩ Min., 500VDC
    • Radial Maximum Load: 220N
    • Axial Maximum Load: 60N
    • Holding Torque: 14Nm
    • Current / Phase: 6.0A
    • Inductance / Phase: 4.9mH
    • Wires: 4
    • Weight: 6.3Kg
  • 500W PSU
    • Power: 500W
    • Input Voltage 220VAC
    • No. of Outputs: 2
    • Output Voltage:
      • 1 X 32VAC
      • 1 X 12V 1A
    • Operating Frequency: 50/60Hz
    • Diameter: 127.5mm
    • Dimensions: 73.8 x 127.5mm
    • Under no circumstances should both ends of the fixing bolt simultaneously contact the metal chassis or framework as this would create a potentially dangerous 'shorted-turn'.

  • Spider Jaw Coupler
    • 19mm-19mm
    • Max. Torque: 14Nm
    • Eccentricity Error < 0.06mm

Shipping List

  • 1 x FYDB808T Stepper Driver
  • 1 x 14Nm Stepper Motor
  • 1 x 500W PSU (Toroidal Transformer)
  • 1 x 19mm-19mm Spider Jaw Coupler


Stepper Motor 14Nm + FYDB808T + 500W PSU Kit

  • Brand: Generic
  • Product Code: FY110EM600BC1-KIT
  • Stock

    Warehouse Stock Status Location
    Centurion Out Of Stock T100
    Stellenbosch Out Of Stock

    We ship free of charge between branches to complete your order.

  • R7,830.00 (Inc Tax: R9,004.50)


Related Products

Stepper Motor 7.7Nm NEMA34

Stepper Motor 7.7Nm NEMA34

Stepper Motor, NEMA34, Holding Torque 7.7Nm These powerful stepper motors can deliver 7.7Nm holding torque and is suitable for high end industrial CNC applications. The DQ860MA is good choice when se..

Centurion
Stellenbosch

R1,725.00 (Inc Tax: R1,983.75)

CNC USB Card Mach3 Breakout Board

CNC USB Card Mach3 Breakout Board

CNC USB Card Mach3 Breakout Board This CNC USB Card Mach3 Breakout Board is great as there is no need to install any USB drivers, it can be used straight after connecting to your computer. It has f..

Centurion
Stellenbosch

R2,669.00 (Inc Tax: R3,069.35)

5 Axis CNC Breakout Board

5 Axis CNC Breakout Board

5 Axis CNC Breakout/Interface Board This CNC breakout board is perfect for your 5 axis CNC applications. Quick Spec Fully supports MACH3 and other parallel controlled computer software. ..

Centurion
Stellenbosch

R195.00 (Inc Tax: R224.25)

Stepper Motor 14Nm 1.8Deg 6A

Stepper Motor 14Nm 1.8Deg 6A

Stepper Motor 14Nm 1.8Deg 6A This high-torque hybrid stepping motor has a 1.8° step angle (200 steps/revolution). Each phase draws 6A at 24V, allowing for a holding torque of 14N. The motor has four ..

Centurion
Stellenbosch

R2,695.00 (Inc Tax: R3,099.25)

Pololu USB Stepper Driver 4A (Max 6A), TIC 36V4 Multi-Interface

Pololu USB Stepper Driver 4A (Max 6A), TIC 36V4 Multi-Interface

Pololu USB Stepper Driver 4A (Max 6A), TIC 36V4 Multi-Interface The Pololu TIC family of stepper motor controllers makes it easy to add basic control of a bipolar stepper motor to a variety of pr..

Centurion
Stellenbosch

R735.00 (Inc Tax: R845.25)

Stepper Motor 4Nm 1.8Deg 5A

Stepper Motor 4Nm 1.8Deg 5A

Stepper Motor 4Nm 1.8Deg 5A This high-torque hybrid stepping motor has a 1.8° step angle (200 steps/revolution). Each phase draws 5A at 24V, allowing for a holding torque of 4N. The motor has four ..

Centurion
Stellenbosch

R945.00 (Inc Tax: R1,086.75)

Tags: stepper, motor, 14nm, fydb808t, 500w, psu, kit, cnc, 14nm