Hantek2D72 70 MHz Oscilloscope, Waveform Generator & Digital Multimeter

An all-new handheld oscilloscope-Hantek2000 series, it continues the compact and lightweight concept but with a new generation of 3 in 1 multifunction tester: oscilloscope, signal source and multimeter.



A small volume of the non-profit grip by a single hand, the suspending stand was designed to support multi-angle adjustment, ultra-low-power, Type C charging interface, and 2 hours battery charge allows working one full day or standby for two months. High-definition colour LCD screen displays clear and the minimalist keyboard design simplifies operation, making it easy to use.

Quick Spec

• Channels: 2
• Sampling Rate: 0-1GSa/s
• Memory: <50k
• Rise Time: >3.5ns
• Screen Type: LCD
• Portable: Handheld
• Bandwidth: 0-99MHz
• Exact Bandwidth: 70MHz
• Exact Sampling Rate: 250MSa/s

Acquisition

• Channel: OSC+ DMM + AFG
• Bandwidth: 70MHz
• Sample Rate: 250MSa/s
• Mode: Normal, Peak Detect
• Average: N acquisitions, all channels simultaneously, N is selectable from 1-128

Input

• Input Coupling: DC, AC, GND
• Input Impedance: Resistance: 1MΩ; Capacitance: 25pF
• Probe Attenuation Factors: 1X, 10X, 100X, 1000X
• Maximum Input Voltage: 200Vpk (DC + peak

Horizontal

• Scanning Speed Range (Sec/Div): 5ns/div ~ 500S/div (1-2-5 sequences)
• Delay Time Accuracy: ±50ppm (any interval ≥1ms)
• Wave form Interpolation: Step, Linear, Sin(x)/x
• Memory Depth (Sample Points): 6k

Vertical

• A/D converter: 8 bit resolution
• Vertical Scale(Volt/div) Range
• 10mV ~ 10V/div @ x1 probe
• 100mV ~ 100V/div @ x10 probe
• 1V ~ 1000V/div @ x100 probe
• 10V ~ 10KV/div @ x1000 probe
• Position Range: ±4 division
• Selectable Analog Bandwidth Limit (typical): 20MHz
• Lower Frequency Response (-3dB): ≤ 10Hz (at input BNC)
• Rise Time at BNC (typical): ≤7ns
• DC Gain Accuracy: ±3%

Trigger

• Trigger Source: CH1, CH2
• Trigger Mode: Auto, Normal and Single
• Trigger Type: Edge trigger, Alternate trigger
• Trigger Sensitivity: 0.02 div increments
• Trigger Level Range: ±4V

Signal Source Mode

• Waveform Impedance: DC~10MHz
• DAC Clock: 2K~100MHz adjustable
• Frequency Resolution: 0.1%
• Channel Count: 1CH Waveform Output
• Waveform Depth: 4KSa
• Waveform Range: ±3.5V Max.

Meter Mode

• Maximum Resolution: 4,000 Counts
• DMM Testing Modes: Voltage, Current, Resistance, Capacitance, Diode & Continuity
• Maximum Input Voltage: AC: 400V, DC: 400V
• Maximum Input Current: AC: 10A, DC: 10A
• Input Impedance: 40 MΩ
• Diode: 0V~2.0V
• On-Off: <50Ω

General Features

• Display: 320*240 TFT LCD
• Interface: USB Device
• Voltage: DC Input: 5V
• Dimensions: 199 x 98 x 41mm
• Net Weight: 1.225Kg

Function Overview

Connection Overview

Interface Overview

Oscilloscope

• 250M Sampling Rate
• 70 MHz Bandwidth
• 10mV~10V Vertical resolution
• Auto automatic measuring function
• Key tone settings
• Adjustable backlight brightness, backlight duration & auto power off time
• Digital voltmeter function
• Cursor measurement
• Reference waveform
• Waveform Storage function

Waveform Generator

• 250MSa/s Sampling rate
• 12 bits vertical resolution
• Sine: 1Hz~25MHz
• Square: 1Hz~10MHz
• Triangular: 1Hz~1MHz
• Trapezoid: 1MHz~5MHz
• Frequency resolution: 1Hz
• Output impedance: 50Ω
• 4 types of arbitrary waveforms

Multimeter

Multi-functional multimeter that can be used to measure:

• AC/DC voltage/current
• Resistance
• Diode
• Capacitance
• On-Off Test

High sensitivity and accuracy, clear display, strong overload ability, and ultra portable.

Resources

• Product Page
• Quick Reference Guide
• User Manual
• Software
• Programming Tool
• HANTEK2D72 CD (.iso format)

Shipping List

• 1 x Hantek2D72 70 MHz 2 Channel Portable Scope
• 2 x Oscilloscope Probes
• 2 x BNC to 2 alligator clip test lead sets
• 1 x DMM test lead set
• 1 x USB Charging/Data Cable
• 1 x USB Charger (100 - 240V AC Input)
• 1 x Users Manual/Support Software on CD-ROM

NOTE: batteries are NOT included