FLIR Radiometric Lepton Dev Kit

  • Brand: Sparkfun
  • Product Code: KIT-14654
  • Stock

    Warehouse Stock Status Location
    Centurion Out Of Stock UR075
    Stellenbosch New Product Arriving Soon
  • R4,700.00 (price excl. VAT)


FLIR Radiometric Lepton Dev Kit

With the FLIR Radiometric Lepton® Dev Kit you will be able to bring FLIR’s thermal imaging reliability and power to your Arduino, Raspberry Pi, or any ARM based development tool all in an easy to access breadboard friendly package. This kit includes a breakout as well as the Lepton® 2.5 longwave infrared (LWIR) imager. All you need to do to get this kit set up, simply attach the Lepton® imager module into the provided breakout, connect the headers, and you will be seeing in full darkness in no time.

The Radiometric Lepton® LWIR module included in each Dev Kit acts as a sort of camera and packs a resolution of 80 × 60 active pixels into a camera body that is smaller than a dime and captures infrared radiation input in its nominal response wavelength band (from 8 to 14 microns) and outputs a uniform thermal image. The Lepton 2.5 can output a factory-calibrated temperature value for all 4800 pixels in a frame irrespective of the camera temperature with an accuracy of +/-5˚C. Meanwhile, each breakout board in these kits provides the socket for the Lepton, power supply’s, 25Mhz Crystal Oscillator, 100 mil header for use in a breadboard or wiring to any host system. A few things to consider about this kit: the breakout board will accept a 3-5V input and regulate it to what the Lepton® wants, to read an image from the lepton module all you need is an SPI port, and to configure the camera settings you also need an I2C port, although this is not required.

Product Video

Quick Spec

  • LWIR sensor, wavelength 8 to 14 μm
  • 50° HFOV, 60° diagonal
  • 80 (h) × 60 (v) active pixels
  • Thermal sensitivity <50 mK
  • Pixel Size: 17 micrometers
  • Frame Rate: 9 Hz

Resources

Shipping List

  • 1 X FLIR Lepton® 2.5 - Thermal Imaging Module
  • 1 X FLIR Lepton® - Breakout Board


Tags: flir, radiometric, radio, metric, lepton, dev, development, kit, image, camera, ir, infra, red, infrared, arduino, raspberry, pi, raspberry pi, long, wave, longwave, kit-13233

Also Bought

JST 2 wire assembly

JST 2 wire assembly

This is a simple two wire cable. Great for jumping from board to board or just about anything else. There is a 2-pin JST connector on one end, bare cable on the opposite end. It also comes with the ma..

R22.00

Battery LiPo 5000mAh 3.7V

Battery LiPo 5000mAh 3.7V

Battery LiPo 5000mAh 3.7V These are very slim, extremely light weight batteries based on the new Polymer Lithium Ion chemistry. This is the highest energy density currently in production. Each cells ..

R250.00

Adafruit Feather HUZZAH with ESP8266 WiFi

Adafruit Feather HUZZAH with ESP8266 WiFi

Adafruit Feather HUZZAH with ESP8266 WiFi + Lipo Battery Feather is the new development board from Adafruit, and like its namesake it is thin, light, and lets you fly! We designed Feather to be a n..

R339.00

Dual RFID 125KHZ + 13.56MHZ Module

Dual RFID 125KHZ + 13.56MHZ Module

Dual RFID 125KHZ + 13.56MHZ Module The Dual RFID 125KHZ + 13.56MHZ Module is integrated with high-performance card reader, RF circuit and antenna, supports both ID and IC cards, and can select Wiegan..

R145.00

Adafruit 32u4 Bluefruit Board

Adafruit 32u4 Bluefruit Board

Adafruit 32u4 Bluefruit Board This is the Adafruit Feather 32u4 Bluefruit - Adafruits' take on an 'all-in-one' Arduino-compatible + Bluetooth Low Energy with built in USB and battery charging. Its an..

R495.00