Linksprite CNC Kit + Laser

The mini CNC engraving machine laser engraving machine is suitable for use on non-metal processing such as plastic, wood, acrylic, pvc, pcb, wood or the similar material, etc . The CNC Kit has an airframe design that adopts a plastic profiles, is small in size, light weight, has a USB interface, and an open source GRBL control.

The repeat positioning accuracy is with in 0.1mm under no-load, usually it is about 0.05mm. The Laser is considered no-load. If you use the engraver, the precision is dependent on the hardness of the material. The Grbl is a no-compromise, high performance, low cost alternative to parallel-port-based motion control for CNC milling. It will run on a vanilla Arduino (Duemillanove/Uno) as long as it sports an Atmega 328.

The controller is written in highly optimized C utilizing every clever features of the AVR-chips to achieve precise timing and asynchronous operation. It is able to maintain up to 30kHz of stable, jitter free control pulses.

It accepts standards-compliant g-code and has been tested with the output of several CAM tools with no problems. Arcs, circles and helical motion are fully supported, as well as all other primary g-code commands. Macro functions, variables, and most canned cycles are not supported, but we think GUIs can do a much better job at translating them into straight g-code.


Grbl includes full acceleration management with look ahead. That means the controller will look up to 18 motions into the future and plan its velocities ahead to deliver smooth acceleration and jerk-free cornering.

Note: The engraver machine couldn't carve 3 dimensional objects. The different hardness of the material, the different thickness of the carving, and the maximum carving thickness is 30mm. The kit includes xyz stepping motors. You don't need purchase any parts separately, it is enough for working.

Quick Spec

    Stepper Motor Specs

    • Motor model no.:L42BYGH34-1334A
    • Voltage:12V-24V
    • Current/phase:1.33 A
    • Resistor/phase: 2.1 Ω
    • Inductance/phase:2.5 mH
    • Static moment:2.2 kg-cm
    • Motor outlet:4#
    • Rotary inertia:35 g-c㎡
    • Motor weight: 0.22kg
    • Positioning torque:120kg-cm
    • Body length:34mm



    Spindle motor Specs

    • Model no.: 775
    • Weight: 350g
    • Shaft Diameter: 5mm
    • Shaft length: 17mm
    • Body length: 66.7mm
    • Front step diameter: 17.4mm
    • Front step height: 4.7mm
    • Body diameter: 42mm
    • Motor Total length: 98mm
    • Diagonal assembly hole distance: 28.8mm
    • Long assembly hole distance: None
    • Assembly hole size: M4
    • Assembly fix hole: 2
    • Radiator fan: Yes



    Laser Head Specs

    • Radiating: forced air cooling
    • Wavelength: 405nm
    • Output Power: 500mW
    • Supply Voltage: Direct Current 12V (7~15VDC)
    • Working Current: 210mA
    • Spot Mode: Point
    • Output Waveband: Visible Light
    • Product Material: Aviation Aluminium
    • Optical Part: Focus lens
    • Operating Life: 10 000 Hours
    • Structure Features: Aluminium alloy shell (deepen tooth radiator) + imported laser diode + constant current driver board



Product Video


User Agreement

  • The power of laser module is relatively high, only for industrial use. Lighting directly to eyes is forbidden which will hurt the eyes.
  • It is prohibited to use in the place where there are inflammable materials and gas, or it could cause fires and explosions.
  • Children are prohibited from contacting with the laser product.
  • Do not open the case of this module or it could be damaged.

Shipping List

  • 1 x CNC Kit
  • Includes:
    • 2 x 2020 Aluminium 240
    • 4 x 2020 Aluminium 220
    • 2 x 2020 Aluminium 200
    • 10 x 2020 90-Degree angle
    • 58 x 2020 Slide Nut
    • 2 x 260 8mm Linear Axis
    • 2 x 240 8mm Linear Axis
    • 2 x 90 8mm Linear Axis
    • 8 x LM8UU Linear Bearings
    • 2 x LM8L Linear Bearings
    • 8 x SK8 Support Base
    • 1 x 20100 mesa 180
    • 2 x Stepper Motor Mounting Plate
    • 3 x 5--8 Couplings 14x25
    • 1 x T8 Lead Screw 90
    • 1 x T8 Lead Screw 210
    • 1 x T8 Lead Screw 230
    • 6 x Copper Nut Lead Screw
    • 3 x Stepper Motor
    • 1 x Spindle Motor
    • 1 x Chuck Drill Chuck
    • 2 x Burin
    • 3 x 4P Motor Line
    • 1 x Switching Power Supply
    • 1 x Control System (Arduino Nano)
    • 1 x Z-Axis
    • 1 x X-Axis
    • 4 x Y-Axis Slide
    • 1 x Y-Axis Nut Seat
    • 2 x Stayed Bracket
    • 3 x Spring
    • 58 x M5x10 Socket Head Cap Screws (Frame)
    • 4 x M3x8 Socket Head Cap Screws (Z-Axis motor)
    • 8 x M3x6 Socket Head Cap Screws (XY-Axis motor)
    • 1 x M4x25 Socket Head Cap Screws (Spinfle lock)
    • 24 x M5 Gasket (Corner pieces, XY-Axis motor mounting plate)
    • 1 x 1.5 Inner Hexagon Wrench
    • 1 x 2 Inner Hexagon Wrench
    • 1 x 2.5 Inner Hexagon Wrench
    • 1 x 3 Inner Hexagon Wrench
    • 1 x 4 Inner Hexagon Wrench
    • 12 x M4x5 Top Lead Screw (XYZ-Axis Couplings)
    • 4 x M3x18 Pillars (Z-Axis motor)

Linksprite CNC Kit + Laser

  • Brand: Linksprite
  • Product Code: LINKSPRITE
  • Product Status : Active
  • Stock

    Warehouse Stock Status Location
    Centurion No Stock
    Stellenbosch No Stock

    We ship free of charge between branches to complete your order.

  • R4,650.00 (Inc Tax: R5,347.50)

Related Products

Proxxon Micro Miller MF70

Proxxon Micro Miller MF70

Proxxon Micro Miller MF70 The Proxxon MF70 Micro Mill is an accurate miller for delicate projects. It has variable spindle speeds between 5,000 and 20,000rpm. This milling machine is intended for w..

Centurion (No Stock)
Stellenbosch (No Stock)
Bulk Location (No Stock)
Part No: MF70
Product Status : Active

R7,985.00 (Inc Tax: R9,182.75)

Tags: linksprite, cnc, kit, laser, engraver, automation, diy