PYCOM GPy LTE
Get on with a board that gets you into the newly available LTE-M networks. The GPy gives you full flexibility during testing, install, deployment and is delivered RCM, IC, CE and FCC certified.
With WiFi, BLE and cellular LTE CAT M1/NB1, the GPy is the latest Pycom triple-bearer MicroPython enabled micro controller on the market today – the perfect enterprise grade IoT platform for your connected Things. Create and connect your things everywhere, fast.
PLEASE NOTE: Pycom modules are powered by the NEW and FEATURE PACKED Espressif ESP32 chip. As a result our firmware is evolving constantly as the ESP32 IDF matures.
NOTE: The LTE Antenna MUST always be used with LTE CAT M1 / NB1, or it could cause serious damage to the development board.
Quick Spec
- Powerful CPU
- 1KM WiFi range
- MicroPython enabled
- Fits in a standard breadboard (with headers)
- Ultra-low power usage: fraction compared to other connected microcontrollers
- Supports 6 bands: 3, 4, 12, 13, 20 and 28
- LTE-M Operating Frequencies
- 34 bands supported from 699Mhz to 2170Mhz (Total world-wide support)
- LTE-M Specification
- One single chip for both CAT M1 and NB1
- 3GPP release 13 LTE Advanced Pro
- Supports narrowband LTE UE categories M1/NB1
- Integrated baseband, RF, RAM memory and power management
- Reduced Tx power class option
- Peak power estimations: TX current = 420mA peak @1.5Watt RX current = 330mA peak @1.2Watt
- Data rates:
- 300kbps DL
- 375 kbps UL (LTE Cat M1 in 1.4Mhz in 1.4 Mhz, HD-FDD)
- 40 kbps DL
- 55kbps UL (LTE Cat M2 in 200 kHz, HD-FDD)
- Interfaces
- 2 x UART, 2 x SPI, I2C, I2S micro SD card
- Analog channels: 8×12 bit ADCs, 2×8 bit DAC
- Timers: 2×64 bit with PWM with up to 16 channels
- DMA on all peripherals
- Power
- Voltage Input: 3.3V – 5.5V
- 3v3 output capable of sourcing up to 400mA
- Processing
- Espressif ESP32 SoC
- Dual processor + WiFi radio system on chip
- Network processor handles the WiFi connectivity and the IPv6 stack
- Main processor is entirely free to run the user application
- An extra ULP-coprocessor that can monitor GPIOs, the ADC channels and control most of the internal peripherals during deep-sleep mode while only consuming 25uA
- Security & Certifications
- SSL/TLS support up to 1.2
- WPA Enterprise security
- AES encryption engine
- Memory
- RAM: 4MB
- Flash Memory: 8MB
- GPIO: Up to 22
- Hardware floating point acceleration
- Python multi-threading
- Hash / Encryption
- SHA, MD5, DES, AES
- WiFi Networking
- 802.11b/g/n 16mbps
- Bluetooth
- Low energy and classic
- RTC: Running at 32KHz
- Size: 55mm x 20mm x 3.5mm (Without Headers)
Resources
Shipping List
- 1 x PYCOM GPy LTE
PYCOM GPy LTE
- Brand: Pycom
- Product Code: PYC-GPY
- Weight: 0.032kg
- Product Status : Active
Stock
| Warehouse | Stock Status | Location |
|---|---|---|
| Centurion | In Stock | Q2-02 |
| Stellenbosch | No Stock | |
| Bulk Location | No Stock |
We ship free of charge between branches to complete your order.
-
R895.00 (Inc Tax: R1,029.25)
Related Products
PYSCAN + RFID-NFC + Accel + Antenna
PYSCAN + RFID-NFC + Accel + Antenna Pyscan is a sensor shield you can use with any of your Pycom multi-network development boards! Featuring an accelerometer, ambient light sensor and NFC/RFID antenn..
R825.00 (Inc Tax: R948.75)
Crow PyBoard + Shield
Crow PyBoard + Shield The Crow Pyboard is a powerful electronics development board which runs MicroPython. Connecting it to your PC via USB, and giving you a USB flash drive on which to save your Pyt..
R348.00 (Inc Tax: R400.20)
Adafruit PyPortal ESP32 Display 3.2"
Adafruit PyPortal ESP32 Display 3.2" The PyPortal uses an ATMEL (Microchip) ATSAMD51J20, and an Espressif ESP32 Wi-Fi coprocessor with TLS/SSL support built-in. PyPortal has a 3.2″ 320 x 240 colour..
R1,338.00 (Inc Tax: R1,538.70)