SparkFun Dual Motor Driver 2A

The TB6612FNG Motor Driver can control up to two DC motors at a constant current of 1.2A (3.2A peak). Two input signals (IN1 and IN2) can be used to control the motor in one of four function modes: CW, CCW, short-brake and stop. The two motor outputs (A and B) can be separately controlled, and the speed of each motor is controlled via a PWM input signal with a frequency up to 100kHz. The STBY pin should be pulled high to take the motor out of standby mode. Due to popular demand, this version of the SparkFun Motor Driver includes pre-soldered male headers for ease of use.

Quick Spec

  • Power supply voltage: VM = 15V max, VCC = 2.7--5.5V
  • Output current: Iout = 1.2A (average) / 3.2A (peak)
  • Standby control to save power
  • CW/CCW/short-brake/stop motor control modes
  • Built-in thermal shutdown circuit and low-voltage detecting circuit
  • All pins of the TB6612FNG broken out to 0.1" spaced pins
  • Filtering capacitors on both supply lines
  • Pre-soldered headers
  • Dimensions: 21 x 21mm
  • Weight: 3g

Resources

Shipping List

  • 1 x SparkFun Dual Motor Driver 2A


SparkFun Dual Motor Driver 2A

  • Brand: Sparkfun
  • Product Code: ROB-14450
  • Stock

    Warehouse Stock Status Location
    Centurion In Stock H4
    Stellenbosch In Stock B0132
  • R125.00 (Inc Tax: R143.75)


Related Products

Dual Motor Controller 1.2A per Channel

Dual Motor Controller 1.2A per Channel

Dual Motor Controller 1.2A per Channel This breakout board uses the powerful Texas DRV8833 dual motor driver can deliver 1.2 A per channel continuously (2 A peak) to a pair of DC motors. With an op..

R145.00 (Inc Tax: R166.75)

Dual Motor Driver 14A

Dual Motor Driver 14A

Dual Motor Driver 14A If you are looking to drive two high-power motors through one compact unit, these dual VNH2SP30 motor driver carriers are perfect for you. With these boards, it’s easy to get ..

R900.00 (Inc Tax: R1,035.00)

Dual motor shield 3A for Arduino

Dual motor shield 3A for Arduino

Dual motor shield 3A for Arduino This motor driver shield and its corresponding Arduino library make it easy to control two bidirectional, brushed DC motors with an Arduino or Arduino clone. The bo..

R470.00 (Inc Tax: R540.50)

Dual Motor Driver for Raspberry Pi 2/3

Dual Motor Driver for Raspberry Pi 2/3

Dual Motor Driver for Raspberry Pi 2/3 This compact expansion board plugs directly into the GPIO header on a Raspberry Pi B+ and provides an easy and low-cost solution for driving a pair of small b..

R135.00 (Inc Tax: R155.25)

L298 Dual H-Bridge Motor Driver

L298 Dual H-Bridge Motor Driver

L298 Dual H-Bridge Motor Driver This module is based on the very popular L298 Dual H-Bridge Motor Driver Integrated Circuit. The circuit will allow you to easily and independently control two motor..

R75.00 (Inc Tax: R86.25)

Wave Dual Motor Driver for PI

Wave Dual Motor Driver for PI

Wave Dual Motor Driver for PI The RPi Motor Driver Board gives your Pi the ability to drive two DC motors OR one stepper motor. It's an ideal choice to DIY mobile robot based on Raspberry Pi. ..

R375.00 (Inc Tax: R431.25)

L298N Mini H-bridge dual motor driver

L298N Mini H-bridge dual motor driver

L298M Mini H-Bridge dual motor driver This Dual H-bridge motor driver, can drive two DC motors or a 4-wire two-phase stepper motor. With built-in TSD, you don't have to worry about motor stall Its..

R35.00 (Inc Tax: R40.25)

Tags: sparkfun, dual, motor, driver, 2a, tb6612, tb6612fng, dc motor