Digital Temperature and Humidity sensor - SHT10 - Fully Calibrated

  • Product Code: SEN0148
  • Stock

    Warehouse Stock Status Location
    Centurion Out Of Stock C129/ L14
    Stellenbosch Out Of Stock D86 / L14
  • R469.00 (price excl. VAT)


Digital Temperature And Humidity Sensor - SHT10

The precision SH10 series temperature and humidity sensors form Sensirion are individually calibrated in a precision humidity chamber and the calibration coefficients are stored on the sensor chip. The SHT1X sensors use a 2-wire serial interface and internal voltage regulation and this allows for easy and fast system integration. The tiny size and low power consumption makes SHT1x series a good choice for even the most demanding applications. The casing is weatherproof and will keep water from seeping into the body of the sensor and damaging it, but allows air to pass through so that it can measure the humidity outside. Humidity readings have 4.5% precision, temperature is 0.5% precision.

Quick Spec

  • Sensor: Digital SHT10 High Precision Sensor
  • Supply: 3.3 - 5V
  • Calibration: Factory - Calibration coefficients are programmed into an OTP memory on the chip
  • Low power consumption: 0.15mW
  • Probe : Factory fitted with 10k pull-up resistor and filter capacitor 0.1uf
  • Interface Type: Serial Digital Two-Wire
  • Humidity Ranger: 0-100%RH
  • Temperature ranger: -10-80℃
  • Humidity accuracy:±5.0%RH
  • Temperature accuracy:±0.5℃
  • Size: 49mm x 14mm
  • Cable Length: 50 cm

Pin Config - Colour Coding

Please note- There is no industry standard for colour coding of sensor wires, see image on top for popular wiring options in the industry. The current probe we have in stock is wired as follows.

  • Brown = Vcc - 5V
  • Black = GND
  • Yellow = Data
  • Blue = Clock

Decoupling

Power supply pins (VCC, GND) must be decoupled with a 100nF capacitor. Don't forget to connect a 10K resistor from the blue Data line to VCC. Like in our case, some probes come pre fitted with the decoupling capacitor and pull-up resistor.

Resources

Sample Code

Shipping List

  • 1 x Digital Temperature And Humidity Sensor

Tags: Digital, Temperature, and, Humidity, sensor digital, temperature, humidity, list, all, products

Also Bought

Premium Jumper Wires - Male Male (50 Pack)

Premium Jumper Wires - Male Male (50 Pack)

Premium Jumper Wires - Male Male (50 Pack) If you need to knock up a quick prototype there’s nothing like having a pile of jumper wires to speed things. These jumper wires are much higher quality t..

R79.00

Power Supply 12V 2A - Compatible with Arduino ® UNO

Power Supply 12V 2A - Compatible with Arduino ® UNO

Power Supply 12V 2A - Compatible with Arduino® UNO This lightweight 12V DC power adapter can supply a load current of up to 2A. This power supply is compatible with UNO and MEGA. Quick Spec ..

R69.00

Temperature Sensor - DS18B20 - 1M

Temperature Sensor - DS18B20 - 1M

Temperature Sensor - 18B20 - 1M Lead This is a waterproofed version of the DS18B20 Temperature sensor. Handy for when you need to measure something far away, or in wet conditions. While the sensor ..

R60.00

DHT11 Temperature and Humidity sensor

DHT11 Temperature and Humidity sensor

DHT11 Temperature and Humidity sensor This DHT11 Temperature and Humidity Sensor features a calibrated digital signal output with the temperature and humidity values The technology ensures the high..

R100.00

Relay 4 channel 5V

Relay 4 channel 5V

Relay 4 channel 5V This is a 5V 4-Channel Relay module, It can be controlled directly by a wide range of microcontrollers such as Arduino, AVR, PIC, ARM and MSP430.Quick Spec  Each 5V Re..

R119.00