The Qwiic LED Stick features ten addressable APA102 LEDs, making it easy to add full colour LED control using I2C. Write to individual LEDs to display a count in binary, or write to the whole strip for cool lighting effects. You can even add more LEDs to the end if you need to. SparkFun have written an Arduino library that takes care of the I2C and communication to the LEDs so all you have to do is decide what colour each LED should be.
The LED Stick has a default I2C address of 0x23 but can be changed with a simple command, allowing you to control over 100 Qwiic LED Sticks on a single bus1! The address can also be changed to 0x22 by closing the solder jumper on the back of the board.
This board is one of our many Qwiic compatible boards! Simply plug and go. No soldering, no figuring out which is SDA or SCL, and no voltage regulation or translation required.
WS2801 RGB String - 50 x WS2801
Each RGB LED and controller chip is molded into a 'dot' of silicone. The dots are weatherproof and rugged. There are four flanges molded in so that you can 'push' them..
Full Colour LED RGB Module I2C
P9813 is a full-color LED driver, using CMOS technology and providing 3 constant-current driver as well as 256 grade modulation output. It adopts 2-wire transmission sc..
WS-2812 RGB 4X4 Display
When it comes to adding colour to an electronics projects, these 4x4 NeoPixel Squares use WS2812 Addressable RGB LED’s to display up to 16777216 different colour combinations,..
WS-2812 RGB 2X2 Display
When it comes to adding colour to an electronics projects, these 2x2 NeoPixel Squares use WS2812 Addressable RGB LED’s to display up to 16777216 different colour combinations,..