USB Relay Board - 8 Way

  • Product Code: USB-RES8
  • Location: Y098
  • Availability: In Stock
  • R299.00 (price excl. VAT)


USB Relay Board - 8 Way

The module has MICRO USB and serial port so that they can communicate with PC and other device conveniently. The normal working voltage for modules is 5V and modules of ICSE014A have a power interface of 5V. Parameters are as follows:

ZKM02

Modules all have Micro USB and serial port . Read following for details:
1.Micro USB: Standard micro USB mother mouth.
2.TX : Transmit
3.RX : Receive
4.5V : Volt current condenser
5.GND : Ground
6.Power Interface : Only ICSE014A have . Interface is used when Micro USB cannot give enough power.

Usage method 1. USB usage method
Module connect with PC through USB . The connection method is as follows:

ZKM02
Then open ”Relay Board Manager” to operate the module . Read ” RelayBoardManager_Reference” for details of the software.

2. Serial port usage method
Module can communicate with other devices directly through the serial port.
Module can receive single byte from upper monitor ( baud rate 9600):
Upper Monitor 0x50 0x51
ICSE012A 0xAB
ICSE013A 0xAD
ICSE014A 0xAC
Module will turn to normal work state after it receives “0x51”. Then every data byte will control the relay directly. Each bit controls a relay ( ‘0’ mark start, ‘1’ mark stop). Read following for details:

ZKM02

Resources

Shipping List

  • 1 X USB Relay Board - 8 Way


Tags: usb, relay board, relay, 8 way

Also Bought

Solenoid 12V Travel 10mm

Solenoid 12V Travel 10mm

Solenoid 12V Travel 10mm Solenoids are a great way to induce linear motion for pushing, pulling or controlling switches and levers.This smaller solenoid is designed to work directly with 12V which ..

R94.00

USB Relay Board - 4 Way

USB Relay Board - 4 Way

USB Relay Board - 4 Way The module has MICRO USB and serial port so that they can communicate with PC and other device conveniently. The normal working voltage for modules is 5V and modules of ICSE0..

R199.00

Socket IC 28 Pin (4 Pack)

Socket IC 28 Pin (4 Pack)

Socket IC 28 Pin (4 Pack) Dip sockets for all your prototyping needs. If you've ever had to de-solder a dip part from a circuit board, you know how valuable these are! This is a 300mil wide 28-pin ..

R10.00

Veroboard 100 x 100mm

Veroboard 100 x 100mm

Veroboard 100 x 100mm Vero Board / Strip board  Experimental Board For Prototypes and projects PCB Size 100x100 Holes 2.54mm apart ..

R25.00

16 Bit IO expander - I2c - Dip

16 Bit IO expander - I2c - Dip

Specifications 16-bit remote bidirectional I/O port High-speed I2C™ interface (MCP23017) High-speed SPI interface (MCP23S17) Three hardware address pins to allow up to eight de..

R32.00