Wave Arduino Starter Kit A + 13 Sensors

The Wave Arduino Starter Kit A is a great way to start playing with various sensors with an Arduino. The kit comes with 13 different sensors which gives you the freedom to play around with different projects.
The Kit comes with an Arduino UNO PLUS which is a development board compatible with the popular Arduino UNO R3; it represents an improved & enhanced alternative solution for the Arduino UNO R3.

Arduino Uno Plus Quick Spec

  • Operating voltage: 5V/3.3V (Dual voltage level to support more shields)
  • Reset: Lateral (Lateral button is easier to use when connecting with shield)
  • Bootloader switch: Yes (The board can be configured to run program immediately when power-up by the switch)
  • USB connector: Micro (USB Micro connector is more commonly used, and shields won't be blocked anymore while connecting)
  • DC jack: Low profile (Shields won't be blocked anymore while connecting)
  • Power output header: Yes (Providing 5V/3.3V power output OR common-grounding with other boards)
  • 3.3V power output: 800mA Max (UNO PLUS features higher driving capability)
  • Oscillator: Crystal oscillator (Crystal oscillator is suit for applications where accurate clock reference is required)
  • ADC channel: 8 (CFG used as ADC6 by configuration, and ADC7 from the Reserved PIN)
  • Connecting with prototype breadboard: Supported (Solder pads is provided for DIY interfaces to connecting with prototype breadboard)
  • USB driver: Compatible with all main systems (Driver will never failed to install thanks to the onboard FT232)
  • Firmware fixing: Supported (Firmware can be fixed by using the onboard FT232, no extra programmer is needed)

Whats On The UNO PLUS

  1. ATMEGA328P-AU
  2. AMS1117-3.3: 3.3V voltage regulator
  3. NCP1117ST50T3G: 5V voltage regulator
  4. FT232RL: USB to UART convertor
  5. Arduino interface
    • compatible with standard Arduino interface with two additional analog inputs A6 (config the CFG), A7
    • solder pads provided, supports prototype breadboard
  6. ICSP interface
  7. MICRO USB connector: for uploading program OR serial port debugging
  8. Power output header: 3.3V OR 5V, voltage level configured by the onboard power configuration switch, used as power output OR common-grounding with other boards
  9. FT232 pins: for burning Bootloader into the microcontroller
  10. DC input: 7V ~ 12V
  11. Reset button
  12. Power indicator
  13. Serial port Rx/Tx indicator
  14. User LED
  15. 500mA fast self-recovery fuse
  16. Power configuration: for configuring the operating voltage
  17. Bootloader selection switch
    • turn ON : the board will reset when power-up OR other USB devices were detected connecting to the PC
    • turn OFF : the onboard program runs immediately when power-up, and the board will not reset when other USB devices were detected connecting to the PC

UNO PLUS Expansion Headers


UNO PLUS Dimension


Sensor Overview

  • MQ-5 Gas Sensor: sensitive for LPG, natural gas, coal gas (gas leakage detector)
  • Colour Sensor: detects static color (sorting by color, color matching)
  • Flame Sensor: sensitive to flame spectrum (fire detection, fire fighting robot, fire alarm)
  • Hall Sensor:49E hall sensor (motor speed measurement, object position detection)
  • Infrared Reflective Sensor: reflective infrared Transceiver (robot path tracking, obstacle-avoiding car, pipeline counter)
  • Laser Sensor: laser sensor (obstacle detection, pipeline counter, smart robot)
  • Moisture Sensor: fork-like soil moisture sensor (auto watering system, flowerpot soil moisture detection)
  • Rotation Sensor: detects clockwise/anti-clockwise rotations (positioning in Industrial Controls)
  • Sound Sensor: onboard audio power amplifier LM386 (ambient sound detection, sound level detection)
  • Temperature-Humidity Sensor: DHT11 temperature and humidity sensor (ambient temperature and humidity detection)
  • Tilt Sensor: detects shake signal (shake detection, guard alarm, smart car)
  • UV Sensor: ultraviolet sensor (ultraviolet tester, outdoor ultraviolet detector, germicidal lamp)
  • Liquid Level Sensor: detects liquid level (water level alarm)


Shipping List

  • 1 x UNO PLUS
  • 1 x USB Type A Plug to Micro B Plug Cable
  • 1 x IO Expansion Shield
  • 1 x Sensors Pack (13 different sensor)

Wave Arduino Starter Kit A + 13 Sensors

  • Brand: Waveshare
  • Product Code: W10257
  • Weight: 0.356kg
  • Stock

    Warehouse Stock Status Location
    Centurion No Stock
    Stellenbosch No Stock

    We ship free of charge between branches to complete your order.

  • R746.00 (Inc Tax: R857.90)

Related Products

LM35 Temperature Sensor - Gravity

LM35 Temperature Sensor - Gravity

LM35 Temperature Sensor - Gravity The DFRobot LM35 Linear Temperature Sensor is based on the semiconductor LM35 temperature sensor. It can be used to detect ambient temperature. This sensor is prod..

Part No: DFR0023

R65.00 (Inc Tax: R74.75)

Tags: wave, arduino, starter, kit, kit a, uno, plus, sensor, gas, mq-5, mq5, mq, colour, flame, fire, hall, speed, alarm, infrared, reflective, ir, tracking, laser, moisture, soil, auto, rotation, sound, lm386, temperature, humidity, dht11, tilt, uv, liquid, level