These 1.3" OLED displays are made by Waveshare and offer better quality than the generic OLED displays. The display uses 3-wire SPI, 4-wire SPI, and I2C interface which makes them simple to use and offer clear and bright display in sunlight. The display has a resolution of 128x64 and uses the SH1106 driver.
Driver Chip: SH1106
Interface: 3-wire SPI, 4-wire SPI, I2C
Resolution: 128 x 64
Display Size: 1.3inch
Visible Aangle: >160°
Operating Temperature: -30℃ ~ +70℃
Storage Temperature: -30℃ ~ +80℃
Operating Voltage: 3.3V / 5V
Application: Hardware platforms such as Raspberry Pi/Jetson Nano/Arduino/STM32
Dimensions: 37.5 x 40.5mm
Power positive (3.3~5V power input)
Clock signal input
Chip selection, low active
Command signal, low level for command, high level for data
Oled 0.49" I2C White
These displays are small, only about 10.0mm x 18mm, but very readable due to the high contrast of an OLED display. This display is made of 64x32 individual white OLED pixels, eac..
Oled 1.3" - Crowtail Connector
The Oled 1.3" is constructed from 128 x 64 dot matrix OLED module. The display offers high brightness, self-emission, high contrast ratio, slim/thin outline, wide viewi..
OLED 0.91" Display I2C White
These displays are small, only about 12.0mm x 39mm, but very readable due to the high contrast of an OLED display. This display is made of 128x32 individual white OLED pi..