Teensy 3.6

  • Product Code: TEENSY3.6
  • Location: H20
  • Availability: In Stock
  • R598.00 (price excl. VAT)


  • 5 or more R564.00
  • 10 or more R521.00

Teensy 3.6 - Arduino Compatible

The Teensy 3.6 is a breadboard-friendly 180 MHz ARM Cortex-M4 development board with loads of features. Each Teensy 3.6 comes pre-flashed with a bootloader so you can program it using the onboard USB connection You can program for the Teensy in your favorite program editor using C or you can install the Teensyduino add-on for the Arduino IDE and write Arduino sketches for it!  This is an Arduino on Steroids :) 

All digital and analog pins are 3.3 volts. Do not apply more than 3.3V to any signal pin. All Teensy boards are shipped assembled and fully tested.

Quick Spec

  • 180 MHz ARM Cortex-M4 with Floating Point Unit
  • 1M Flash, 256K RAM, 4K EEPROM
  • Microcontroller Chip MK66FX1M0VMD18
  • USB High Speed (480Mbit/sec) Port
  • 2 CAN Bus Ports
  • 32 General Purpose DMA Channels
  • 22 PWM Outputs
  • 4 I2C Ports
  • 11 Touch-Sensing Inputs
  • 62 I/O Pins (42 breadboard friendly)
  • 25 Analog Inputs to 2 ADCs with 13-bit resolution
  • 2 Analog Outputs (DACs) with 12-bit resolution
  • USB Full Speed (12Mbit/sec) Port
  • Ethernet mac, capable of full 100Mbit/sec speed
  • Native (4-bit SDIO) micro SD card port
  • I2S Audio Port, 4-Channel Digital Audio Input & Output
  • 14 Hardware Timers
  • Cryptographic Acceleration Unit
  • Random Number Generator
  • CRC Computation Unit
  • 6 Serial Ports (2 with FIFO and Fast Baud Rates)
  • 3 SPI Ports (1 with FIFO)
  • Real-Time Clock

Teensy 3.6 video by Sparkfun

Resources

Tags: Teensy 3.6