MKS GBRL Board + 2.4" TFT Screen

This is a great MKS kit to get you going with your own CNC machine, 3D printer, or laser cutter. The kit includes the MKS DLC V2.0 controller board, the 2.4" TFT Screen, and a A4889 stepper driver. The control board from Makerbase is based off of the 328P chip from Atmel, it is a 3 axis control board with the ability to power a DC motor or 12V Laser diode directly from the board. It is compatible with GRBL V1.0, Benbox as well as mDraw. The A4988 is a complete microstepping motor driver with built-in translator for easy operation. This driver can use in full, half, 1/4, 1/8 and 1/16 step modes operate bipolar stepper motors, output drive capacity of up to 35 V and ± 2 A. The MKS TFT24 is a colour touch screen that is used independently and you don't need to set up the display motherboard software, but works together directly with the controller.

MKS-GBRL-LCD-001

Quick Spec

  • MKS DLC V2.0 Controller Board
    • ATmega 328p Processor
    • 4 x motors (3 axes): X Y1, Y2, Z
    • Supports virtually all SteepStick: DRV8825, TMC2100, LV8729, TMC2208, etc.
    • 3 Stepper Motor external drivers
    • Can be connected via USB
    • 3 x port Endstops (X, Y, Z)
    • Laser control ports: TTL / PWM, 12V, 5V1
    • Servomotor control port and 1 DCA motor port
    • Power: 12VDC
    • Auxiliary port (For TFT screen or other options)
  • MKS TFT24 Screen
    • Name: MKS TFT24
    • Version: V1.1
    • Processor: STM32
    • File Format: G-Code
    • Voltage: 5V
    • Read Code via SD Card
    • Firmware Updat via SD Card
  • A4988 Stepper Motor Driver
    • Operating Voltage: 8V ~ 35V
    • Continuous Current per Phase: 1A (Without a heat sink or forced air flow)
    • Maximum Current per Phase: 2A (With sufficient additional cooling)
    • Logic Voltage: 3V ~ 5.5V
    • Microstep Resolutions: full, 1/2, 1/4, 1/8, and 1/16
    • No Reverse Voltage Protection

Wiring Diagram

0-J10073-600

HTB1ro81-Xhrv-K1-Rj-Sszeq6y-Ob-FXa-Y

Resources

Shipping List

  • 1 X MKS MKS DLC V2.0 GRBL Controller
  • 1 X MKS TFT24 Screen
  • 1 X A4988 Steopper Driver with Heatsink
  • 1 X USB Programming Cable
  • 1 X 8-Pin Ribbon Cable


MKS GBRL Board + 2.4" TFT Screen

  • Brand: Generic
  • Product Code: MKS-GBRL-LCD
  • Stock

    Warehouse Stock Status Location
    Centurion In Stock U223
    Stellenbosch In Stock 108
  • R565.00 (Inc Tax: R649.75)


Related Products

MKS 3D Printer Controller - Base

MKS 3D Printer Controller - Base

MKS 3D Printer Controller - Base The MKS Base boards are based off of the classic Arduino MEGA 2560, RAMPS 1.4, and A4988 trio with some other differences. It uses a PCBA layout that combines many ma..

R495.00 (Inc Tax: R569.25)

MKS 3D Printer Board - MEGA + RAMP 1.4 All in One

MKS 3D Printer Board - MEGA + RAMP 1.4 All in One

MKS 3D Printer Board - MEGA + RAMP 1.4 - All in One The MKS Gen V1.4 printer motherboard control board combines and improves the assets solution of the RAMPS 1.4 and Arduino Mega 2560 board on a fant..

R398.00 (Inc Tax: R457.70)

MKS Stepper Breakout + Cable

MKS Stepper Breakout + Cable

MKS Stepper Breakout + Cable This MKS CD V1.0 stepper driver breakout board is used when stand alone stepper driver is used with a board which is design for small stepper drivers (A4988 & DRV8825..

R80.00 (Inc Tax: R92.00)

MKS DLC V2.0 GRBL Controller

MKS DLC V2.0 GRBL Controller

MKS DLC V2.0 GRBL Controller This control board from Makerbase is based off of the 328P chip from Atmel, it is a 3 axis control board with the ability to power a DC motor or 12V Laser diode directl..

R239.00 (Inc Tax: R274.85)

MKS TB67S109 Stepper Driver 3.2A

MKS TB67S109 Stepper Driver 3.2A

MKS TB67S109 Stepper Driver 3.2A The MKS TB67S109 Stepper Driver is a complete microstepping motor driver with built-in translator for easy operation. This driver is capable of full, half, 1/4, 1/8, ..

R250.00 (Inc Tax: R287.50)

MKS 3D Printer LCD 12864 Display

MKS 3D Printer LCD 12864 Display

MKS 3D Printer LCD 12864 Display The MKS 3D Printer LCD 12864 Display meets all requirements for 3D printer control. Compatible with Ramps and MKS series 3D printer control cards, you can easily us..

R265.00 (Inc Tax: R304.75)

MKS Bed Level Sensor

MKS Bed Level Sensor

MKS Bed Level Sensor The MKS Bed Level Sensor is a device that uses the hall effect to achieve leveling. The position of the point can be obtained by touching the point on the heated bed, and then ..

R328.00 (Inc Tax: R377.20)

Tags: mks, gbrl, mks-gbrl, 2.4", tft, screen, kit, lcd, display, a4988, cnc, 3d printer, 3d, engraving, laser, makerbase, maker