SparkFun SAMD21 Dev Breakout

  • Brand: Sparkfun
  • Product Code: DEV-13672
  • Location: FD2-11
  • Availability: In Stock
  • R345.00 (price excl. VAT)


SparkFun SAMD21 Dev Breakout

If you’re ready to step your Arduino game up from older 8-bit/16MHz microcontrollers, the SparkFun SAMD21 Dev Breakout is a great landing spot. The SparkFun SAMD21 Dev Breakout is an Arduino-sized breakout for the Atmel ATSAMD21G18, a 32-bit ARM Cortex-M0+ processor with 256KB flash, 32KB SRAM, and an operating speed of up to 48MHz. This dev breakout provides you with an Arduino hardware option that solves the problems of low storage limits and dynamic memory stack overflows that have plagued the previous iterations of the Arduino family. Yes, the SparkFun SAMD21 Dev Breakout is even fully supported in the Arduino IDE and libraries for the Arduino Zero!

The SparkFun SAMD21 Dev Breakout has been equipped with a USB interface for programming and power, surrounded with an RTC crystal, and a 600mA 3.3V regulator. By utilizing the Pro R3’s extra PCB real-estate we’ve been able to leave room for a few extra GPIO pins and an integrated LiPo charger. To power the SAMD21 Breakout board, just plug it into a USB port on your computer via the micro-B port on the breakout. Not near a USB port? No problem, the SparkFun SAMD21 Dev Breakout is also equipped with a LiPo Battery connector (for a single-cell 3.7-4.2V litium-polymer battery) and unpopluated supply input to solder on your own PTH Barrel Jack. If you’ve used any Arduino before, this pinout shouldn’t surprise you – the layout meets the Arduino 1.0 footprint standard, including a separate SPI header and additional I2C header.

One of the most unique features of the SAMD21 is SERCOM – a set of six configurable serial interfaces that can be turned into either a UART, I2C master, I2C slave, SPI master, or SPI slave. Each SERCOM provides for a lot of flexibility: the ports can be multiplexed, giving you a choice of which task each pin is assigned.

Note: The breakout does NOT have headers installed and will need to purchased and soldered on yourself.

Quick Specs

  • ATSAMD21G18 32-bit/48MHz ARM Cortex-M0+
  • 256KB Flash Memory
  • 32KB SRAM
  • 32KB of EEPROM (emulated in Flash)
  • 30 GPIO Count
  • 14 ADC Channels at 12-bit Resolution
  • Analog-to-Digital and Digital-to-Analog Converters (ADC & DAC)
  • Vin: 4.2V-6.0V for charger - otherwise 3.5V-6.0V
  • VBATT: 3.7V Lipo
  • VCC: 600mA @3.3V
  • Arduino R3 Layout
  • Integrated USB Controller

Resources

Shipping List

  • 1 x SparkFun SAMD21 Dev Breakout

Related Products

Arduino M0 Pro - Made in Italy

Arduino M0 Pro - Made in Italy

Arduino M0 Pro - Made in Italy We are quite excited to get our hands on a few Arduino Zeros. We not 100% sure when we will received them, but the order is placed and we hope to get them around th..

R589.00

Arduino M0 - Made in Italy

Arduino M0 - Made in Italy

Arduino M0 - Made in Italy With the new Arduino M0 board, the more creative individual will have the potential to create one’s most imaginative and new ideas for IoT devices, wearable technologie..

R399.00

SparkFun SAMD21 Mini Breakout

SparkFun SAMD21 Mini Breakout

SparkFun SAMD21 Mini Breakout If you’re ready to step your Arduino game up from older 8-bit/16MHz microcontrollers, the SparkFun SAMD21 Mini Breakout is a great landing spot. The SAMD21 Mini Breakout..

R345.00

Arduino M0 Mini Board - SAMD21 - Compatible

Arduino M0 Mini Board - SAMD21 - Compatible

Arduino M0 Mini Board - 32 BIT If you’re Arduino project need more speed and storage, get ready for the 32-Bit Arduino M0. The board features a powerful 32-bit ARM Cortex processor operating at 48..

R269.00

Tags: sparkfun, samd21, dev, breakout

Also Bought

ATmega328 + Dual Motor Controller

ATmega328 + Dual Motor Controller

ATmega 328 + Dual Motor Controller (Orangutan B-328) The Baby Orangutan dual motor controller is a complete control solution for small robots, all packed into a tiny 30 x 18mm 24-pin DIP pac..

R330.00

Micro Metal Motor 100:1 + Ext Shaft

Micro Metal Motor 100:1 + Ext Shaft

Micro Metal Motor 100:1 + Ext Shaft This gearmotor is a miniature (0.94" x 0.39" x 0.47"), high-power brushed DC motor with 100.37:1 metal gearbox, similar to Sanyo’s popular 12 mm gearmotors. Thes..

R196.00

Encoder, Optical for Micro Metal Gearmotors

Encoder, Optical for Micro Metal Gearmotors

Optical Encoder Pair Kit for Micro Metal Gearmotors 5V Add quadrature encoders to your micro metal gearmotors (extended back shaft version required) with this kit consisting of two sensor boards,..

R110.00

ESP-01 ESP8266 Wifi Board

ESP-01 ESP8266 Wifi Board

ESP-01 ESP8266 Wifi Board + Antenna This WiFi serial transceiver module is based on the ESP8266 chipset. The ESP8266 modules offer a very cheap way to expand microcontroller projects with Interne..

R90.00

Power Adapter 5V 3A - Micro USB

Power Adapter 5V 3A - Micro USB

AC Adapter 5V 3A micro USB Perfect power supply for your Raspberry Pi, Latte Panda, Orange Pi or PC Duino. Quick Spec Output Voltage : 5V DC Max Output Current : 3A Connector : Micro U..

R118.00