• RGB LED matrix  32x16

RGB LED matrix 32x16

  • Product Code: AF2279
  • Location: W023
  • Availability: In Stock
  • R410.00 (price excl. VAT)


RGB LED matrix 32x16

Bring a little bit of Times Square into your home with this sweet 16 x 32 square RGB LED matrix panel. These panels are normally used to make video walls, here in New York we see them on the sides of busses and bus stops, to display animations or short video clips. We thought they looked really cool so we picked up a few boxes of them from a factory. This version is the 3mm pitch 16x32 RGB LED Matrix. Please note you cannot use an Arduino UNO to drive this size, its way too big! Use an Arduino Mega, Raspberry Pi, BBB or other device that can handle displaying to RGB matricies and has plenty of RAM.This panel is a lot like our 4mm Grid 64x32 RGB LED matrix panel, but the LEDs on this one are a little closer together (a 3mm pitch) so you won’t have to stand as far away to appreciate it. It's made to look good indoors, even with a wide-angle view (160 degrees) and look great in ambient light. If you want a wider pitch for a farther viewing distance, check out our 6mm pitch 64x32 RGB LED Matrix or our 5mm pitch 16x32 RGB LED Matrix. This matrix has 2048 bright RGB LEDs arranged in a 16x32 grid on the front. On the back there are two IDC connectors (one input, one output: in theory you can chain these together) and 12 16-bit latches that allow you to drive the display with a 1:16 scan rate. These displays are technically 'chainable' - connect one output to the next input - but our Arduino example code does not support this (yet). These panels require 13 digital pins (6 bit data, 7 bit control) and a good 5V supply, up to 4A per panel. We suggest our 4A regulated 5V adapter and then connecting a 2.1mm jack. Please check out our tutorial for more details!

Quick Specs

  • 1 x single 64x32 RGB panel,
  • 1 x IDC cable
  • 1 x plug in power cable
  • Shipping List

    • 1 x RGB LED matrix 32x16


Tags: RGB LED matrix 32x16

Also Bought

Arduino UNO R3

Arduino UNO R3

Arduino UNO R3 This is the new Arduino Uno R3. In addition to all the features of the previous board, the Uno now uses an ATmega16U2 instead of the 8U2 found on the Uno (or the FTDI found on previo..

R189.00

16x32 RGB LED Panel Driver Shield

16x32 RGB LED Panel Driver Shield

16x32 RGB LED Panel Driver Shield An Arduino Uno shield for driving a 16x32 RGB matrix panel with a HUB75 (8x2 IDC) connector. It provides a matching 2×8 IDC connector for setting up easy connectio..

R275.00

Arduino Mega R3

Arduino Mega R3

Arduino Mega R3 The Arduino Mega is a microcontroller board based on the ATmega2560. It has 54 digital input/output pins (of which 14 can be used as PWM outputs), 16 analog inputs, 4 UARTs (hardwar..

R289.00

GSM Quad Band Antenna 2dBi - SMA - 90 Deg Bend

GSM Quad Band Antenna 2dBi - SMA - 90 Deg Bend

GSM Antenna 2dBi SMA Plug - 90 Deg Bend This 61mm long antenna has 2dBi of gain and 50Ω impedance so it will work fantastically with just about any GSM frequency ( 850/900/1800/1900/2100) wireless ..

R48.00

Panel Mount USB Cable - B Male to B Female

Panel Mount USB Cable - B Male to B Female

USB B connector male to Panel Mount This handy USB extension cable will make it easy for you to enclose a device that has a B type port. We think this would be most handy when putting an Arduino in a..

R59.00