SHT10 Temperature + Humidity Sensor - 5m

The precision SH10 series temperature and humidity sensors form Sensirion are individually calibrated in a precision humidity chamber and the calibration coefficients are stored on the sensor chip. The SHT1X sensors use a 2-wire serial interface and internal voltage regulation and this allows for easy and fast system integration. The tiny size and low power consumption makes SHT1x series a good choice for even the most demanding applications. The casing is weatherproof and will keep water from seeping into the body of the sensor and damaging it, but allows air to pass through so that it can measure the humidity outside. Humidity readings have 4.5% precision, temperature is 0.5% precision.

Quick Spec

  • Sensor: Digital SHT10 High Precision Sensor
  • Supply: 3.3 - 5V
  • Calibration: Factory - Calibration coefficients are programmed into an OTP memory on the chip
  • Low power consumption: 0.15mW
  • Probe : Factory fitted with 10k pull-up resistor and filter capacitor 0.1uf
  • Interface Type: Serial Digital Two-Wire
  • Humidity Ranger: 0-100%RH
  • Temperature ranger: -10-80℃
  • Humidity accuracy:±5.0%RH
  • Temperature accuracy:±0.5℃
  • Size: 49mm x 14mm
  • Cable Length: 5 m

Pin Config - Colour Coding

Please note- There is no industry standard for colour coding of sensor wires, see image on top for popular wiring options in the industry. The current probe we have in stock is wired as follows.

  • Brown = Vcc - 5V
  • Black = GND
  • Yellow = Data
  • Blue = Clock

Decoupling

Power supply pins (VCC, GND) must be decoupled with a 100nF capacitor. Don't forget to connect a 10K resistor from the blue Data line to VCC. Like in our case, some probes come pre fitted with the decoupling capacitor and pull-up resistor.

Resources

Sample Code

Shipping List

  • 1 x SHT10 Temperature + Humidity Sensor - 5m

SHT10 Temperature + Humidity Sensor - 5m

  • Brand: Generic
  • Product Code: SHT10-5M
  • Stock

    Warehouse Stock Status Location
    Centurion In Stock Q2-01
    Stellenbosch In Stock B0406
  • R525.00 (Inc Tax: R603.75)


Related Products

Digital Temperature and Humidity sensor - SHT10 - Fully Calibrated

Digital Temperature and Humidity sensor - SHT10 - Fully Calibrated

Digital Temperature And Humidity Sensor - SHT10 The precision SH10 series temperature and humidity sensors form Sensirion are individually calibrated in a precision humidity chamber and the calibra..

R469.00 (Inc Tax: R539.35)

SHT15 Temperature & Humidity Sensor

SHT15 Temperature & Humidity Sensor

SHT15 Temperature and Humidity Sensor SHT15 is Sensirion’s family of surface mountable relative humidity and temperature sensors. The sensors integrate sensor elements plus signal processing on a t..

R345.00 (Inc Tax: R396.75)

SHT15 Temperature & Humidity Sensor

SHT15 Temperature & Humidity Sensor

SHT15 Temperature and Humidity Sensor - Module SHT15 is Sensirion’s family of surface mountable relative humidity and temperature sensors. The sensors integrate sensor elements plus signal processing..

R498.00 (Inc Tax: R572.70)

18B20 Digital Temp Sensor - 5 Meter

18B20 Digital Temp Sensor - 5 Meter

Temperature Sensor - DS18S20 - 5M Lead This is a waterproofed version of the DS18S20 Temperature sensor. Handy for when you need to measure something far away, or in wet conditions. While the senso..

R98.00 (Inc Tax: R112.70)

SHT10 Temp/ Humidity Sensor Brick

SHT10 Temp/ Humidity Sensor Brick

Electronic Brick - SHT10 Temperature / Humidity Sensor SHT10 is a digital relative temperature sensor with two-wire interface, ultra-small size, wide voltage range, wide measurable temperature range ..

R178.00 (Inc Tax: R204.70)

18B20 Temperature Module

18B20 Temperature Module

18B20 Temperature Module This is an electronic thermometer which has high accuracy over a wide range (accurate to ±0.5°C over the range of -10°C to +85°C). You can locate these thermometer chips up t..

R50.00 (Inc Tax: R57.50)

Tags: digital, temperature, humidity, sensor, digital, digital temperature, humidity, temp & hum, sht10