Arduino UNO R3 - Original
This is the new Arduino Uno R3. In addition to all the features of the previous board, the Uno now uses an ATmega16U2 instead of the 8U2 found on the Uno (or the FTDI foun..
UNO R3 with 16U2 USB Interface
This is a compatible UNO R3 and is Compatible with Arduino®. In addition to all the features of the previous board, the Uno now uses an ATmega16U2 instead of the 8U2 ..
Arduino UNO R3 Compatible with CH340 USB Chipset
The Uno R3 with the CH340 USB Chipset is an Uno compatible version of the latest R3 iteration of the Arduino Uno, which is the most popular of the m..
3-in-1 Charger Cable - 1m
This 3-in-1 Charger Cable will ensure that you’re never stuck looking for a USB cable that fits your device. At the one end of the cable is standard A-type connector, whic..
4D Systems Tiny Hard Disk Drive 2GB
The microDRIVE (uDRIVE-uSD-G1) is an extremely compact high performance Embedded Disk Drive" module that can be easily added to any micro-controller design that re..
A Star 32U4 Prime LV
The A-Star 32U4 Prime LV is a programmable board based on Atmel’s ATmega32U4 microcontroller and arranged in the common Arduino form factor. The A-Star Prime offers many additi..
A-Star 328PB Micro 3.3V 8MHZ - Compatible with Arduino®
The A-Star 328PB Micro is a tiny programmable module featuring the ATmega328PB AVR microcontroller, a backward-compatible replacement for the p..
Adafruit BlackPill STM32F411 Dev Board
This simple development board for the STM32F411 is a great way to add a powerful STM chip to your next project. Featuring the STM32F411CEU6, this chip has 512..
Adafruit Feather ESP32 S2 Dev Board
The FeatherS2 is a full-featured ESP32-S2 based development board in a Feather format. The FeatherS2 comes with 16 MB of Flash which means you'll never run out o..
Adafruit Feather RP2040 - Qwiic
Love the Adafruit Feather format? Interested in using Raspberry Pi silicon? Then you’re in luck! With the Adafruit Feather RP2040, you’ll be creating new IoT project..
Adafruit KB2040 - RP2040 Kee Boar Driver
An Arduino Pro Micro-shaped board for Keebs with RP2040. Adafruit have mixed together what we liked most about the SparkFun Pro Micro RP2040 (Qwiic / STEMMA..
Adafruit Metro M4 + ESP32
Give your next project a lift with AirLift - Adafruits' name for the ESP32 co-processor that graces this Metro M4. The Adafruit Metro M4 featuring the Microchip ATSAMD51, wi..
Adafruit PDM Mic Module QWIIC Ready
Adafruits' PDM is the 'third' kind of microphone you can integrate with electronics, apart from analog or I2S.
The first thing to note is that this sensor does ..
AlphaBot 2 Robot Building Kit for Micro:Bit (Incl.)
This AlphaBot2 robot kit is designed to use with the BBC micro:bit. It features rich common robot functions including line tracking, obstacle avo..
Arduino DUE - Original
Original Arduino Boards is of the highest quality and Made in Italy. The Arduino® Due is a microcontroller
board based on the Atmel SAM3X8E ARM Cortex-M3 CPU. It i..
Arduino GIGA R1 WiFi - Original
A new board joins the Arduino family, and it’s the most powerful ever designed for makers, engineers and creators: the GIGA R1 WiFi! Bridging you from great fun to a..
Arduino Leonardo Original - Micro USB
The Arduino Leonardo is a microcontroller board based on the ATmega32u4. It has 20 digital input/output pins (of which 7 can be used as PWM outputs and 12 as a..
Arduino Mega 2650 Core (3.3V/5V) - Compatible
The Arduino Mega 2560 is a microcontroller board based on the ATmega2560. It has 54 digital input/output pins, 16 analog inputs, 4 UARTs, a 16 MHz quar..
Arduino Mega R3 2560 - CH340 USB Chipset (Compatible)
The Arduino Mega 2560 Compatible is a microcontroller board based on the ATmega2560. It has 54 digital input/output pins (of which 14 can be us..
Arduino NANO Original
The Arduino Nano is a small, complete, and breadboard-friendly board based on the ATmega328 (Arduino Nano 3.x). It has more or less the same functionality of the Arduino Duemi..
Arduino Nano RP2040 Connect
Arduino Nano RP2040 is the next board in the Arduino Nano series and the first board created in collaboration with Raspberry Pi.
The module is based on the Raspberr..
Arduino Tian Original
The Arduino Tian board includes two processors: Atmel's SAMD21 MCU and a Qualcomm Atheros AR9342 MIPS processor with integrated 2.4/5 GHz dual-band WiFi. The Qualcomm Atheros ..
Arduino YUN Rev 2 - Original
The Yún Rev 2, Linux powered board with the Arduino simplicity, is the perfect board for your IoT projects!
The Yún rev. 2 with the power of a Linux based system that ..
Arduino Zero Original
The Zero is a simple and powerful 32-bit extension of the platform established by the UNO. The Zero board expands the family by providing increased performance, enabling a var..
ATmega4809-PF 20MHz, 40 Dip
The ATmega4809 microcontrollers of the megaAVR® 0-series uses the AVR® processor with hardware multiplier, running at up to 20 MHz, with a wide range of Flash sizes up to ..
ATTINY412 20MHz 4Kb Flash - SMD (4 Pack)
The ATtiny412 is a microcontroller using the 8-bit AVR® processor with hardware multiplier, running at up to 20MHz and 4KB Flash, 256B SRAM and 128 bytes o..
Battery Holder for Micro:Bit - 2xAA
This is a unique two-cell AA battery holder built specifically for the BBC micro:bit. The 6" (~150mm) cable has been terminated with a JST-PH connector.
The con..
BBC micro:bit V2.2 Board Only (max 5 per customer)
Please note, due to limited stock, we can only
supply 5 per customer and cannot do multiple orders.
The micro:bit V2 is a pocket sized compute..
BeagleBone Green with WiFi
Seeed Studio BeagleBone® Green Gateway is a joint effort by BeagleBoard.org and Seeed Studio. Based on the open-source hardware design of BeagleBone® Black, the newest Se..
Breakout Board for Electret Microphone
This small breakout board couples an Electret microphone (100Hz--10kHz) with a 60x mic preamplifier to amplify the sounds of voice, claps, door knocks or any ..
Camera Holder for RunCam Micro Swift 2
This bracket holder allows your micro/mini FPV camera to be mounted to a flat surface, at a 45o angle.
Quick Spec
Material: PLA (Polylactic Acid)
..
Converter Micro USB to USB C
This handy USB 3.1 Type-C Male To Micro USB Female Short Cable lets you connect a device with a Type-C port to any Micro USB cable or charger.
Quick Spec
Fe..
Converter Micro USB to USB C - 20cm
This handy USB Type-C Male To Micro USB Female Cable lets you connect a device with a Type-C port to any Micro USB cable or charger.
Quick Spec
Femal..
Crowtail Starter Kit - Micro:Bit - End of Line
END OF LINE
Please note, this product has been retired and is no longer available.
The Micro:Bit board is a pocket-sized computer that can easil..
DF Clutch Servo 0.4kg 300 Degree
f you’ve ever looked at a cool little robot and seen it’s head swiveling from side to side while simultaneously looking up and down for full freedom of vision, then..
DF Clutch Servo 2kg 300 Degree
f you’ve ever looked at a cool little robot and seen it’s head swiveling from side to side while simultaneously looking up and down for full freedom of vision, then y..
DF Robot 16340 / CR123A Li-ion Battery Holder + Charger
This is a Li-ion 16340 / CR123A Battery Holder and has over-current and reverse polarity protection. Batteries can be charge through the Micr..
DF Robot 3-in-1 Endoscope Camera
Get this camera to help you see what you cannot see and touch! This small inspection camera employs a 3-in-1 USB, USB Micro, and USB Type-C design for being conveni..
DF Robot Beetle ESP32 C3 - RISC-V
The Beetle ESP32-C3, mainly intended for IoT applications, is a controller based on ESP32-C3 RISC-V 32bit single-core processor.
On a coin-size board of 25 x 20..
DF Robot Clutch Servo 6kg 300 Degree
If you’ve ever looked at a cool little robot and seen it’s head swiveling from side to side while simultaneously looking up and down for full freedom of vision,..
DF Robot ESP32 Board with Headers
The DF Robot FireBeetle ESP32-E IoT Microcontroller is specially designed for IoT, is an ESP-WROOM-32E-based main controller board with dual-core chips. This MCU s..
DF Robot ESP32 FireBeetle Terminal Block
This expansion shield for FireBeetle 2 is just right for makers who love using terminal blocks for wiring up their projects!
Compared with the previo..
DF Robot I2S Microphone Module
This high sensitivity single microphone module features MSM261S4030H0 digital silicon chip, I2S output, onboard SK9822 series RGB LED, and two-wire control color.
MS..
DF Robot Micro:Bit Game Pad
The Micro:bit gamepad is an expansion gamepad based on the micro:bit. You only need to plug in the micro:bit and it will turn into a wireless remote controller and a wir..
DF Robot Micro:Bit Mini Expansion - Micro:Mate
The Micro:Mate is a tiny Micro:Vit I/O expansion board for learning electronics and building DIY projects. Micro:Mate expands 6 sets of 3-pin I/O inte..
DFRobot Beetle ESP32 Board
This Beetle-ESP32 Microcontroller is a simplified version of FireBeetle-ESP32 and specially designed for electronic engineering fans and DIY lovers. It is equipped with 4 a..
Digital Micrometer 0-25mm 0.001
A digital micrometer generally provides greater precision than a vernier caliper, but can measure a smaller range of lengths.
Quick Spec
Measuring Force: 5~1..
EACHINE TS5828L FPV Micro Transmitter 5.8GHz - 40 Channel
The Eachine TS5828L Micro 5.8G 600mW 40CH Mini FPV Transmitter comes with a Digital Display For RC Drone. The unit offers great range and v..
Electret Microphone Amp MAX9814
The MAX9814 is a low-cost, high-quality microphone amplifier with automatic gain control (AGC) and low-noise microphone bias. The device features a low-noise preampl..
Enviro Science Board for Micro:Bit
The Environment Science Board for Micro:Bit is designed with highly symbolic trees, houses, and snowy mountains. On a wide and easy-to-use PCB, it integrates many..
ESP32 C3 Board with 0.42 inch OLED
ESP32-C3 is a low-cost microcontroller from Espressif that supports 2.4 GHz Wi-Fi and Bluetooth® Low Energy (Bluetooth 5 (LE)). Use RISC V as the core. There's a ..
ESP32 C3 Mini Dev Board
The ESP32-C3 is powered by a RISC-V 32-bit single-core processor with a clock frequency of up to 160 MHz. It has 22 programmable GPIO pins, built-in 400 KB SRAM, and support..
ESP32 Dev Kit V4.1 - ESP32 WROOM 32D
ESP32-WROOM-32D is a powerful, generic Wi-Fi+BT+BLE MCU modules that target a wide variety of applications, ranging from low-power sensor networks to the most d..
ESP32- DEVKIT C Dual Antenna
ESP32-DevKitC is a low-footprint and entry-level development board that is part of the ESP32 series. This board has a rich peripheral set. The built-in ESP32 pinout is ..
Exen Mini - M0 48MHz - ATSAMD21 Chipset - Compatible with Arduino M0
The Exen Mini from Nerdonic is a tiny 32-bit microcontroller compatible with arduino and breadboard development. It's not just s..
