• Xbee Pro S2C 802.15.4 2.4GHz 65MW

Xbee Pro S2C 802.15.4 2.4GHz 65MW

  • Brand: Generic
  • Product Code: XBP24CAPIT-001
  • Stock

    Warehouse Stock Status Location
    Centurion Out Of Stock
    Stellenbosch In Stock Z2003
  • R659.00 (price excl. VAT)


Xbee Pro S2C 802.15.4 2.4GHz 65MW

XBee/XBee-PRO S2C 802.15.4 RF Modules are embedded solutions providing wireless end-point connectivity to devices. These devices use the IEEE 802.15.4 networking protocol for fast point-to-multipoint or peer-to-peer networking. They are designed for high-throughput applications requiring low latency and predictable communication timing. The Xbee Pro S2C module supports the needs of low-cost, low-power wireless sensor networks. The devices require minimal power and provide reliable delivery of data between devices. The devices operate within the ISM 2.4 GHz frequency band. The module uses S2C hardware and the Silicon Labs EM357 chipset. As the name suggests, the 802.15.4 module is over-the-air compatible with the Legacy 802.15.4 module (S1 hardware). The unit also provides a long-range line-of-sight communication for up to 1200m or 3200m.

Quick Spec

  • Serial Data Interface UART, SPI
  • Configuration Method API or AT commands, local or over-the-air (OTA)
  • Frequency Band ISM 2.4 GHz
  • Form Factor Through-Hole, Surface Mount
  • Hardware S2C
  • ADC Inputs (4) 10-bit ADC inputs
  • Digital I/O 15
  • Antenna Options Through-Hole: PCB Antenna, U.FL Connector, RPSMA Connector or Integrated wire
  • SMT: RF Pad, PCB Antenna or U.FL Connector
  • Operating Temperature: -40oC ~ +85oC

Pinout

XBP24-CAPIT-001-003
  Pin     Name   Direction     Description  
   1   VCC   -   Power supply
   2   DOUT   Output   UART data out
   3   DIN/CONFIG   Input   UART data In
   4   SPI_MISO   Output   Serial Peripheral Interface (SPI) Data Out  
   5   RESET   Input   Module reset (reset pulse must be at least 200 ns). This must be driven as an open drain/collector. The device drives this line low when a reset occurs. Never drive this line high.  
   6   PWM0/RSSI PWM   Output   PWM output 0 / RX signal strength indicator
   7   PWM1   Output   PWM output 1
   8   [Reserved]   -   Do not connect
   9   DI8/SLEEP_RQ/DTR   Input   Pin sleep control line or digital input 8
  10   GND   -   Ground
  11   DIO4/SPI_MOSI   Both   Digital I/O 4 / SPI Data In
  12   DIO7/CTS   Both   Digital I/O 7 / Clear-to-send flow control
  13   ON/SLEEP   Output   Device sleep status indicator
  14   VREF   -   Feature not supported on this device. Used on other XBee devices for analog voltage reference.  
  15   DIO5/ASSOC   Both   Digital I/O 5 / Associated indicator
  16   DIO6/RTS   Both   Digital I/O 6 / Request-to-send flow control
  17   DIO3/AD3/SPI_SSEL   Both   Digital I/O 3 / Analog input 3 / SPI select
  18   DIO2/AD2/SPI_CLK   Both   Digital I/O 2 / Analog input 2 / SPI clock
  19   DIO1/AD1/SPI_ATTN     Both   Digital I/O 1 / Analog input 1 / SPI Attention  
  20   DIO0/AD0   Both   Digital I/O 0 / Analog input 0

Resources

Shipping List

  • 1 X Xbee Pro S2C 802.15.4 2.5GHz 65MW


Related Products

Xbee Shield

Xbee Shield

Xbee Shield The XBee Shield V1.1 is an enhanced serial port XBee module breakout board. It is compatible with Arduino, and it can directly plug into the Arduino board like a shield, and uses any on..

R125.00

XBee 3.1mW PCB Antenna - DigiMesh 1200m Outdoor Range

XBee 3.1mW PCB Antenna - DigiMesh 1200m Outdoor Range

XBee 3.1mW PCB Antenna - Outdoor 1200m Range - Support C DigiMesh® 2.4 This is the very popular 2.4GHz XBee module from Digi. These modules take the 802.15.4 stack (the basis for Zigbee) and wrap ..

R398.00

XBee Pro 63mW PCB Antenna - Series 2B

XBee Pro 63mW PCB Antenna - Series 2B

XBee Pro 63mW PCB Antenna - Series 2B XBee/XBee-PRO S2C 802.15.4 RF Modules are embedded solutions providing wireless end-point connectivity to devices. These devices use the IEEE 802.15.4 networki..

R598.00

XBee Pro Shield

XBee Pro Shield

XBee Pro Shield This is revision three of the XBee shield. It enables an Arduino Uno or Mega to wireless communicate using the popular XBee modules. It is a fully assembled shield without an XBee mod..

R100.00

XBee Pro XCS S3B 14Km Line of Sight

XBee Pro XCS S3B 14Km Line of Sight

XBee Pro XCS S3B 14Km Line of Sight XBee modules are developed by Digi. They operates in 900 MHz frequency. They are wireless communication modules which are compatible with 802.15.4, ZigBee Mesh and..

R689.00

Tags: xbee, pro, s2c, 802, 2.4ghz, 65mw, wireless, zigbee, mesh

Also Bought

Particle Duck Antenna 2.4GHZ 2DBI

Particle Duck Antenna 2.4GHZ 2DBI

Particle Duck Antenna 2.4GHZ 2DBI These external antennas are the perfect way to extend the wireless range of your Particle-powered Wi-Fi project. The Duck Antenna is especially great for projects th..

R178.00

ADXL335 Triple Axis Accelerometer Breakout

ADXL335 Triple Axis Accelerometer Breakout

ADXL335 Module Triple Axis Accelerometer Breakout The 3 axis ADXL335 from Analog Devices is the latest in a long, proven line of analog sensors - the holy grail of accelerometers. The ADXL335 is a ..

R69.00

Sound Sensor Breakout Module, Microphone with LM386 Amplifier

Sound Sensor Breakout Module, Microphone with LM386 Amplifier

Sound Sensor + LM386 Amplifier The Waveshare Sound Detector is a small and very easy to use audio sensing board with different outputs. The Sound Detector not only provides an audio output, but als..

R50.00

8 Channel I2C Bidirectional logic level converter

8 Channel I2C Bidirectional logic level converter

8 Channel I2C Bidirectional logic level converter This bidirectional logic convertor uses the TXB0108 chip to perform bidirectional level shifting from pretty much any voltage to any voltage and wi..

R98.00

Xbee Shield

Xbee Shield

Xbee Shield The XBee Shield V1.1 is an enhanced serial port XBee module breakout board. It is compatible with Arduino, and it can directly plug into the Arduino board like a shield, and uses any on..

R125.00