Dual 1.2A Motor Driver Shield for Arduino

This motor driver shield and its corresponding Arduino library make it easy to control a pair of bidirectional, brushed DC motors with an Arduino or compatible board, such as the A-Star 32U4 Prime. The board features Texas Instruments’ DRV8835 dual H-bridge motor driver IC, which allows it to operate from 1.5 V to 11 V and makes it particularly well suited for driving small, low-voltage motors. The shield can deliver a continuous 1.2 A per channel and tolerate peak currents up to 1.5 A per channel for a few seconds, and the channels can be optionally configured to run in parallel to deliver twice the current to a single motor. The shield ships fully populated with its SMD components, including the DRV8835 driver and a FET for reverse battery protection; header pins for interfacing with an Arduino and terminal blocks for connecting motors and power are included but are not soldered in.

2511-003

Quick Spec

  • Motor driver: DRV8835
  • Motor channels: 2
  • Minimum operating voltage: 1.5V (The DRV8835 itself has a minimum motor supply voltage of 0 V, but the board's reverse-voltage protection circuit limits the minimum to 1.5 V.)
  • Maximum operating voltage: 11V
  • Continuous output current per channel: 1.2A (typical results with 100% duty cycle at room temperature)
  • Peak output current per channel: 1.5A
  • Continuous paralleled output current: 2.4A (typical results with 100% duty cycle at room temperature)
  • Maximum PWM frequency: 250kHz
  • Reverse voltage protection

Resources

Shipping List

  • 1 X DRV8835 Dual Motor Driver Shield for Arduino
  • 1 X Connector Set


Dual 1.2A Motor Driver Shield for Arduino

  • Brand: Pololu Electronics
  • Product Code: 2511
  • Product Status : Active
  • Stock

    Warehouse Stock Status Location
    Centurion In Stock GG343
    Stellenbosch In Stock A0048
    Bulk Location No Stock

    We ship free of charge between branches to complete your order.

  • R295.00 (Inc Tax: R339.25)


Related Products

Stepper Motor 2Nm NEMA23 3A per Phase

Stepper Motor 2Nm NEMA23 3A per Phase

Stepper Motor 2Nm NEMA23 3A per Phase The 57BYGH627 Bipolar Stepper Motor by Wantai delivers 2Nm of holding torque with each phase drawing up to 3A. With color-coded wires ending in bare leads, it..

Centurion (In Stock)
Stellenbosch (In Stock)
Bulk Location (No Stock)
Part No: 57BYGH627
Product Status : Active

R628.00 (Inc Tax: R722.20)

Dual Motor Driver for Raspberry Pi 2/3

Dual Motor Driver for Raspberry Pi 2/3

Dual Motor Driver for Raspberry Pi 2/3 This compact expansion board plugs directly into the GPIO header on a Raspberry Pi B+ and provides an easy and low-cost solution for driving a pair of small b..

Centurion (No Stock)
Stellenbosch (In Stock)
Bulk Location (No Stock)
Part No: 2753
Product Status : Active

R135.00 (Inc Tax: R155.25)

Tags: drv8835, dual, arduino, a-star, 32u4, dual h-bridge, h-bridge