Volt Regulator 5V 0.6A VIN 5.2-50V

  • Brand: Pololu Electronics
  • Product Code: 3792
  • Stock

    Warehouse Stock Status Location
    Centurion In Stock UL327
    Stellenbosch In Stock Z2118
  • R78.00 (price excl. VAT)


Volt Regulator 5V 0.6A VIN 5.2-50V

This compact switching step-down (or buck) voltage regulator takes input voltages up to 50V and efficiently reduces them to 5V while allowing for a maximum output current of 600 mA. It has a very low dropout, so it can be used with input voltages that are within a few hundred millivolts of its output. The pins have a 0.1″ spacing, making this board compatible with standard solderless breadboards and perfboards.

3797-003

Quick Spec

  • Minimum Operating Voltage: 5.2V (Subject to dropout voltage considerations)
  • Maximum Operating Voltage: 50V
  • Maximum Output Current: 600 mA
  • Output Voltage: 5V
  • No Reverse Voltage Protection
  • Maximum Quiescent Current: 0.1 mA (While enabled with no load. Can be reduced to under 2 μA using the enable pin)
  • Output Type: Fixed 5V

Resources

Shipping List

  • 1 X Volt Regulator 5V 0.6A VIN 5.2-50V


Tags: volt, regulator, 5v, 0.6a, 50v, voltage, step-down, step, down

Also Bought

Resistor Kit 300 Pieces

Resistor Kit 300 Pieces

Resistor Kit 300 Pieces This Resistors Kit is one of the most basic kit and contain 300 resistors in total. The resistor is rated 1/4W,5% precision and there are 30 different values in total and 10 o..

R58.00

Relay 2 Channel 5 volt

Relay 2 Channel 5 volt

Relay module - 2 Channel 5 volt   This is a 5V 2-Channel Relay module, It can be controlled directly by a wide range of microcontrollers such as Arduino. Specifications: Channels..

R85.00

Relay 5V (Pack of 4)

Relay 5V (Pack of 4)

Relay 5V (Pack of 4)These are high quality Single Pole - Double Throw (SPDT) relays. Use them to switch high voltage, and/or high current devices. This relay’s coil is rated up to 5V, with a mini..

R28.00

Pro Micro 32U4 Board - 5V 16Mhz - Arduino Bootloader

Pro Micro 32U4 Board - 5V 16Mhz - Arduino Bootloader

Pro Micro 32U4 Board - 5V 16Mhz - Arduino Bootloader  This tiny little board use the same 32u4 microcontroller as the Arduino Leonardo. The 32u4 is running at 16MHz and 5V. There is a voltage ..

R129.00

Spacer Kit - Nylon

Spacer Kit - Nylon

Spacer Kit - Nylon 180 pieces PCB Standoffs is a vital part when prototyping on a regular basis. This kit consist of 180 pieces of M3 Screws, Standoffs and Nuts. Quick Spec A 5.7 +/-0..

R125.00