RF Receiver 433 MHZ - 4 Channel
The RXC6 Wireless RF Receiver Module is a high-sensitivity, 4-channel receiver operating at 433 MHz. Its integrated 4-bit decoding and excellent signal-to-noise ratio, thanks to the Superheterodyne Receiver, make it a reliable choice for your remote control and home automation applications.
Quick Spec
- Frequency: 433.92Mhz
- Operating voltage: 3 to 5.5V DC
- Quiescent Current: 4mA
- Receiver sensitivity:-105DB
- Size: 30 x 14 x 7mm
- External antenna: 32CM single core wire, wound into a spiral
RXC6 Board Layout
Pin Functions
- 1 ANT - External Antenna - Spiral 32cm
- 2 GND - Ground
- 3 External LED
- 4 External Switch for programming mode
- 5 VT: Will flash when signal receive
- 6 Data D0
- 7 Data D1
- 8 Data D2
- 9 Data D3
Jumper Settings - Directly Translated from Chinese
Supports different modes (Momentary, Latching, Toggle) depending on jumper settings
- T2 & T1 Open - Momentary Default
- T2 Closed, T1 Open - Latching Mode
- T2 Open, T1 Closed - Toggle Mode
Learn button
Learning Mode:
- Press and hold the learn button on the RXC6 module for 2 seconds. The indicator light should turn on, indicating that the module has entered learning mode.
- Release the learn button and press any button on your remote control. The indicator light on the module should flash four times, indicating that the module has successfully learned the remote control's code and exited learning mode.
Reset:
- Press and hold the learn button on the RXC6 module until the indicator light turns off (about 8 seconds). This should clear all previously learned codes from the module.
Arduino Code
Shipping List
- 1 x RF Receiver 433 MHZ - 4 Channel
- 1 x RF Wire Antenna
RF Receiver 433 MHZ - 4 Channel
- Brand: Generic
- Product Code: RXC6-RECEIVER
- Weight: 0.004kg
- Product Status : Active
Stock
| Warehouse | Stock Status | Location |
|---|---|---|
| Centurion | No Stock | |
| Stellenbosch | No Stock |
We ship free of charge between branches to complete your order.
-
R49.00 (Inc Tax: R56.35)
Related Products
CY33 RF RX/TX Pair - 433Mhz
CY33 RF RX/TX Pair - 433Mhz The CY33 is based on a Superheterodyne design with PLL and Automatic Gain Control. The new design is less immune to noise than our standard TX/RX pair. The CY33 pair is a ..
R68.00 (Inc Tax: R78.20)


