USB Relay Board - 4 Way

  • Product Code: USB-REL4
  • Stock

    Warehouse Stock Status Location
    Centurion In Stock Y099
    Stellenbosch In Stock E71
  • R199.00 (price excl. VAT)


USB Relay Board - 4 Way

The module has MICRO USB and serial port so that they can communicate with PC and other device conveniently. The normal working voltage for modules is 5V and modules of ICSE014A have a power interface of 5V. Parameters are as follows:

ZKM02

Modules all have Micro USB and serial port . Read following for details:
1.Micro USB: Standard micro USB mother mouth.
2.TX : Transmit
3.RX : Receive
4.5V : Volt current condenser
5.GND : Ground
6.Power Interface : Only ICSE014A have . Interface is used when Micro USB cannot give enough power.

Usage method 1. USB usage method
Module connect with PC through USB . The connection method is as follows:

ZKM02
Then open ”Relay Board Manager” to operate the module . Read ” RelayBoardManager_Reference” for details of the software.

2. Serial port usage method
Module can communicate with other devices directly through the serial port.
Module can receive single byte from upper monitor ( baud rate 9600):
Upper Monitor 0x50 0x51
ICSE012A 0xAB
ICSE013A 0xAD
ICSE014A 0xAC
Module will turn to normal work state after it receives “0x51”. Then every data byte will control the relay directly. Each bit controls a relay ( ‘0’ mark start, ‘1’ mark stop). Read following for details:

ZKM02

Resources

Shipping List

  • 1 X USB Relay Board - 4 Way


Tags: usb, relay board, relay, 4 way

Also Bought

4 Channel Relay Module - Opto-Isolated

4 Channel Relay Module - Opto-Isolated

Relay 4 Channel - Opto-Isolated This is a 5V 4-Channel Relay module, and each input is opto-isolated. It can be controlled directly by a wide range of microcontrollers such as Arduino. Quick Spe..

R129.00

USB Relay Board - 8 Way

USB Relay Board - 8 Way

USB Relay Board - 8 Way The module has MICRO USB and serial port so that they can communicate with PC and other device conveniently. The normal working voltage for modules is 5V and modules of ICSE0..

R299.00

Power Adapter 5V 3A - Micro USB

Power Adapter 5V 3A - Micro USB

AC Adapter 5V 3A micro USB Perfect power supply for your Raspberry Pi, Latte Panda, Orange Pi or PC Duino. Quick Spec Output Voltage : 5V DC Max Output Current : 3A Connector : Micro U..

R118.00

Raspberry Pi 3 - Model B

Raspberry Pi 3 - Model B

Raspberry Pi 3 Model B The Raspberry Pi 3 is the third generation Raspberry Pi. It replaced the Raspberry Pi 2 Model B in February 2016. Compared to the Raspberry Pi 2 it has: Specs Compared To ..

R498.00

DB9 to RS232 TTL module

DB9 to RS232 TTL module

DB9 to RS232 TTL module The smallest and easiest to use serial conversion circuit on the market! This board has one purpose in life - to convert RS232 to TTL and vice versa (TX and RX). This will a..

R95.00