GSM SIM868 HAT for Raspberry Pi

  • Product Code: W13460
  • Location: U047 / 017
  • Availability: Out Of Stock
  • R550.00 (price excl. VAT)


GSM SIM868 HAT for Raspberry Pi

This is a handy, Raspberry Pi HAT which features multi communication functionalities: GSM, GPRS, GNSS and Bluetooth.
It allows your Pi to easily make a telephone call, send messages, connect to wireless Internet, global position, transfer data via Bluetooth, and so on.

Quick Spec

  • Raspberry Pi connectivity, compatible with Raspberry Pi 2B/3B/Zero/Zero
  • Supports SMS, phone call, GPRS, DTMF, HTTP, FTP, MMS, email, etc
  • Support GPS, COMPASS, Glonass, LBS base station positioning, omni-positioning
  • Bluetooth 3.0, supports data transferring through Bluetooth
  • Onboard USB TO UART converter CP2102 for UART debugging
  • SIM card slot for 1.8V/3V SIM card
  • RTC with backup battery holder
  • Baudrate auto detection (1200bps ~115200bps)
  • Control via AT commands (3GPP TS 27.007, 27.005, and SIMCOM enhanced AT Commands)
  • Supports SIM application toolkit: GSM 11.14 Release 99

  • GSM/GPRS
    • Band
      • GSM 850/EGSM 900/DCS 1800/PCS 1900 MHz
      • Quad-band auto search
      • Compliant to GSM phase 2/2+
    • Emitting power
      • Class 4 (2W @ GSM 850/EGSM 900 MHz)
      • Class 1 (1W @ DCS 1800/PCS 1900 MHz)
    • GPRS connectivity
      • GPRS multi-slot class 12 (default)
      • GPRS multi-slot class 1~12 (configurable)
    • GPRS data feature
      • Downlink speed: max 85.6kbps
      • Uplink speed: max 85.6kbps
      • Coding schemes: CS-1\CS-2\CS-3\CS-4
      • Supports PAP (Password Authentication Protocol) for PPP connection
      • Supports PBCCH
      • Supports USSD
    • SMS
      • Supports: MT/MO/CB/Text/PDU mode
      • SMS storage: SIM card
    • Audio
      • Voice encode/decode mode: Half Rate\Full Rate\Enhanced Full Rate\Adaptive muti rate
      • Supports echo cancellation
      • Supports noise reduction
    • GNSS
      • Receiver type
        • 33 tracking channels
        • 99 acquisition channels
        • GPS L1 C/A code
      • Sensitivity
        • Tracking: -165 dBm
        • Cold starts : -148 dBm
      • Time-To-First-Fix
        • Cold starts : 28s (typ.)
        • Hot starts : < 1s
        • Warm starts: 26s
    • Accuracy
      • Horizontal position : <2.5m CEP
    • Bluetooth
      • Integrates AT commands
      • Compliant to Bluetooth specification3.0 + EDR
      • Supports SPP, OPP, HFP/HSP, etc.
  • Operating voltage: 5V
  • Operating temperature: -40°C ~ 85°C
  • Storage temperature: -45°C ~ 90°C
  • Dimensions: 30.2mm x 65mm

Board Layout

W13460_003
  1. SIM868 module
  2. ZMM5V1: regulator diode
  3. SMF05C: TVS diode
  4. CP2102: USB TO UART converter
  5. MP1482: power chip
  6. NDC7002N: voltage level translator
  7. GPS status indicator
  8. NET indicator:
    • flashes fast when the module starts up
    • flashes slowly after GSM register succeed
  9. STA module working status indicator
  10. SIM868 UART Tx/Rx indicator
  11. Power indicator
  12. SIM868 control button: press the button and hold for 1s, to startup/shutdown the SIM868
  13. Raspberry Pi GPIO connector
  14. SIM card slot
  15. USB TO UART interface
  16. 3.5mm earphone/mic jack
  17. GNSS antenna connector
  18. Bluetooth antenna connector
  19. GSM antenna connector
  20. CR1220 battery holder: for RTC backup battery
  21. UART selection switch
  • A: control the SIM868 through USB TO UART
  • B: control the SIM868 through Raspberry Pi
  • C: access Raspberry Pi through USB TO UART

Resources

Shipping List

  • 1 X GSM/GPRS/GNSS HAT
  • 1 X GSM Antenna
  • 1 X GPS External Antenna (B)
  • 1 X Bluetooth Antenna
  • 1 X USB type A plug to micro plug cable
  • 1 X RPi screws pack (2pcs)


Tags: GSM, GPRS, GNSS, Bluetooth, HAT, Raspberry Pi, BT

Also Bought

Raspberry Pi 3 - Model B

Raspberry Pi 3 - Model B

Raspberry Pi 3 Model B The Raspberry Pi 3 is the third generation Raspberry Pi. It replaced the Raspberry Pi 2 Model B in February 2016. Compared to the Raspberry Pi 2 it has: Specs Compared To ..

R498.00

Power Adapter 5V 3A - Micro USB

Power Adapter 5V 3A - Micro USB

AC Adapter 5V 3A micro USB Perfect power supply for your Raspberry Pi, Latte Panda, Orange Pi or PC Duino. Quick Spec Output Voltage : 5V DC Max Output Current : 3A Connector : Micro U..

R118.00

Micro SD Card 8GB - Class 10

Micro SD Card 8GB - Class 10

Micro SD Card 8GB - Class 10 This is 8GB microSD memory card - Class 10 is 100% compatible with Raspberry Pi 2/3. These microSD cards have a simple to use SPI interface allowing any micro to read a..

R115.00

DB9 to RS232 TTL module

DB9 to RS232 TTL module

DB9 to RS232 TTL module The smallest and easiest to use serial conversion circuit on the market! This board has one purpose in life - to convert RS232 to TTL and vice versa (TX and RX). This will a..

R95.00

USB to TTL 5V & 3.3V Switch - Micro USB Connector

USB to TTL 5V & 3.3V Switch - Micro USB Connector

FT232 USB UART Board - Micro USB (Original FT232RL) - 5V & 3.3V Switch This USB to UART breakout board use the industry standard FT232RL chipset and support Windows 7/8/10, Mac, Linux, Android ..

R98.00