This is an OLED display HAT for Raspberry Pi, 2.23inch diagonal, 128×32 pixels, with embedded SSD1305 driver, communicating via SPI or I2C interface. The display uses the standard Raspberry Pi 40PIN GPIO extension headers, supports Raspberry Pi series boards, Jetson Nano
Interface: SPI / I2C
Display Size: 2.23inch diagonal
Display Colour: white
Viewing angle: >160°
Power Supply Voltage: 3.3V/5V
Logic Level: 3.3V
RASPBERRY PI PIN (BCM)
SPI data input
Chip selection, low active
Data/Command selection (high for data, low for command)
Oled 0.49" I2C White
These displays are small, only about 10.0mm x 18mm, but very readable due to the high contrast of an OLED display. This display is made of 64x32 individual white OLED pixels, eac..
Adafruit OLED Pi Zero Display
The OLED Bonnet Pack for Raspberry Pi Zero sets you up with the Pi Zero W, and Adafruit's popular 128x64 OLED Bonnet. This version has 128x64 pixels (instead of 128x32) ..
Adafruit OLED FeatherWing
This is the Assembled FeatherWing OLED. it adds a 128x32 monochrome OLED plus 3 user buttons to any Feather main board. Comes fully assembled so you can connect a FeatherWin..