Wave 1.47 inch Industrial Display - SPI
The built-in controller used in this LCD is ST7789V3, which is an LCD controller with 240 x RGB x 320 pixels, while the pixels of this LCD itself are 172(H)RGB x 320(V). There are two types of horizontal and vertical screens, so the internal RAM of the LCD is not fully used.
The LCD supports 12-bit, 16-bit and 18-bit input colour formats per pixel, namely RGB444, RGB565, RGB666 three color formats, this demo uses RGB565 color format, which is also a commonly used RGB format. The LCD uses a four-wire SPI communication interface, which can greatly save the GPIO port, and the communication speed will be faster.
Quick Spec
- Operating Voltage: 3.3V / 5V
- Communication Interface: 4-wire SPI
- Display Panel: IPS
- Driver: ST7789V3
- Resolution: 172 × 320 pixels
- Display Size: 17.39 × 32.35mm
- Pixel Pitch: 0.0337 × 0.1011mm
- Dimensions: 22.0 × 38.5mm
Dimensions
Controlled Via SPI Bus
Wiring Diagram
Raspberry Pi

Arduino

Resources
Shipping List
- 1 x Wave 1.47" Industrial Display - SPI
- 1 x PH2.0 8PIN cable
Wave 1.47 inch Industrial Display - SPI
- Brand: Waveshare
- Product Code: W22224
- Weight: 0.019kg
- Product Status : Active
Stock
| Warehouse | Stock Status | Location |
|---|---|---|
| Centurion | No Stock | |
| Stellenbosch | In Stock | 819 |
We ship free of charge between branches to complete your order.
-
R225.00 (Inc Tax: R258.75)
Related Products
Wave 1.44 LCD 128x128 For PI
Wave 1.44 LCD 128x128 For PI This is an LCD display HAT for Raspberry Pi, 1.44inch diagonal, 128x128 pixels, with embedded controller, communicating via SPI interface Quick Spec Driver:..
R189.00 (Inc Tax: R217.35)
Wave 1.14" IPS Display SPI 65K Colour
Wave 1.14" IPS Display SPI 65K Colour This IPS display makes use of ST7789VW which is a single-chip controller/driver for 262K-colour, graphic type TFT-LCD. It consists of 240 source line and 320 g..
R118.00 (Inc Tax: R135.70)
Wave 1.28 inch IPS Round LCD Display SPI
Wave 1.28 inch IPS Round LCD Display SPI This is a 1.28” LCD Display Module with an input voltage of 3.3V ~ 5.5V, which is used to display colorful patterns and characters. The driver used in this ..
R246.00 (Inc Tax: R282.90)
Tags: wave, 1.47", 1.47inch, industrial, display, spi, st7789v3, 3.3v, 5v, 172x320







