Wave ESP32-P4 WiFi6 with Camera & LCD – Kit C

The ESP32-P4 WiFi6 Nano Dev Board – Kit C is a powerful multimedia development platform from Waveshare, designed around the ESP32-P4 with integrated ESP32-C6 for Wi-Fi 6 and Bluetooth 5 (BLE) connectivity. It features a 400MHz dual-core RISC-V processor and supports up to 32MB PSRAM and 32MB Flash, offering robust processing capability for complex multimedia and IoT applications. With a rich array of interfaces including MIPI-CSI, MIPI-DSI, SPI, I2S, I2C, UART, and USB 2.0 OTG, the board is ideal for projects involving high-quality imaging, intelligent control, and human–machine interaction.



Kit C includes the ESP32-P4-NANO board, a 10.1" MIPI DSI Capacitive Touch Display (800×1280), and a 5MP Raspberry Pi Camera Module (B). This combination delivers a complete hardware platform for developing advanced visual systems such as smart control panels, industrial displays, and computer vision applications. With built-in security features like Secure Boot, Flash Encryption, and cryptographic acceleration, the ESP32-P4 WiFi6 Nano Dev Kit C provides both performance and protection in demanding embedded environments.

Quick Spec

• Processor: RISC-V 32-bit dual-core (400MHz) + single-core LP system
• Wireless: Wi-Fi 6 & Bluetooth 5 (BLE) via ESP32-C6 co-processor
• Memory: 32MB PSRAM, 32MB Flash
• Display: 10.1" IPS Capacitive Touch (800×1280), GT9271 touch controller
• Camera: Raspberry Pi Camera (B) – 5MP OV5647 sensor, F2.0 aperture, 60.6° FOV
• Interfaces: MIPI-CSI, MIPI-DSI, SPI, I2S, I2C, UART, USB 2.0 OTG, TF card slot, 2×20 GPIO header
• Audio: Onboard microphone, Codec, and amplifier with speaker port
• Security: Secure Boot, Flash Encryption, Cryptographic accelerators
• Display Brightness: 400cd/m² (customizable up to 1000cd/m²)
• Operating Temperature: 0°C ~ 60°C

Dimensions

Board Layout

1. ESP32-P4NRW32: ESP32-P4 chip, with 32MB PSRAM
2. ESP32-C6: SDIO 3.0 interface protocol, extending Wi-Fi 6 / Bluetooth 5 (LE) for ESP32-P4
3. 16MB Nor Flash
4. ESP32-C6 UART pads
5. PoE module header: connect to external PoE module (NOT included) for PoE power supply function
6. 40PIN GPIO header
7. 100M RJ45 Ethernet port
8. USB OTG function selection: switching to HOST end for expanding USB ports
9. USB-A ports: USB OTG 2.0 high-speed ports, switching to HOST or DEVICE via jumper
10. Speaker header: MX1.25 2P connector, supports 8Ω 2W speaker
11. Onboard microphone
12. 3.5mm audio jack: Supports audio playback via connected headphones
13. Camera interface: MIPI-CSI (2-lane), supports OV5647 camera, etc
14. Display interface: MIPI-DSI (2-lane), supports 5 / 7 / 8 / 10.1 inch DSI screen
15. I2C interface
16. I3C interface
17. Type-C UART port: for power supply, program burning and debugging
18. Type-C USB port: for power supply, program burning
19. RTC battery header: for connecting rechargeable RTC battery (supports rechargeable RTC batteries only)
20. PWR: Power indicator
21. ESP32-C6 SMD antenna
22. BOOT Button: Press it when powering on or resetting to enter download mode
23. RST Reset button
24. TF card slot: SDIO 3.0 interface protocol

Pinout

Resources

• Product Page
• Product Wiki
• Schematic
• ESP32-P4 Datasheet
• ESP32-P4-WIFI6-DEV-KIT Demo

Shipping List

• 1 x ESP32-P4-WIFI6-DEV-KIT
• 1 x 10.1-DSI-TOUCH-A
• 1 x RPi Camera (B)
• 1 x 8Ω 2W speaker
• 1 x FFC 15-Pin cable
• 1 x MIPI-DSI-Cable-12cm
• 2 x FFC 22-Pin cable
• 1 x MX1.25 2-Pin to SH1.0 2PIN cable ~80mm
• 1 x MX1.25 2-Pin to 2.54 3PIN cable ~110mm
• 1 x USB Type-A dual-plug cable
• 1 x USB Type-A to Type-C cable
• 2 x SH1.0 4-Pin cable ~150mm
• 1 x Standoffs
• 1 x Screws pack