PWM Signal Generator + Screen

  • Product Code: XY-LPWM
  • Stock

    Warehouse Stock Status Location
    Centurion In Stock U229
    Stellenbosch In Stock 63
  • R90.00 (price excl. VAT)


PWM Signal Generator + Screen

The PWM Signal Generator + Screen is capable of generating square wave signal for experimental development that involves PWM dimming and speed controlling (e.g. motor drivers) as well as other micro controller use. It can be controlled via the Serial Protocol TTL (TXD & RXD pins). It is stable and reliable, and fairly simple to use.

Quick Spec

  • Operating Voltage: 3.3 - 30 VDC
  • Frequency Range: 1Hz – 150 KHz
  • Frequency Accuracy: the accuracy in each range is about 2%
  • Signal Load Capacity: 5 - 30 mA
  • Output Amplitude: PWM Amplitude Equal to the Supply Voltage
  • Operating Temperature: -20 - +70 Celsius
  • Dimensions: 52 x 32 x 10 mm
XY LPWM 003

Communication Standard

  • 9600 bps Data bits: 8
  • Stop bit: 1
  • Check digit: none
  • Flow control: none

Serial Communication

  1. Setting the frequency of the PWM:
    • Command "F101": Set the frequency to 101 HZ (001 to 999)
    • Command "F1.05": set the frequency of 1.05 KHZ (1.00 ~ 9.99)
    • Command "F10.5": Set the frequency to 10.5KHZ (10.0 ~ 99.9)
    • Command "F1.0.5": set the frequency of 105KHZ (1.0.0 ~ 1.5.0)
  2. Setting the PWM duty cycle:
    • DXXX": set the PWM duty cycle to XXX; (001 ~ 100)
    • Example: “D050”, sets the PWM duty cycle is 50%
  3. Read the set parameter
    • Send a "read" string to read the set parameters
    • Set successfully return: DOWN
    • Setup failed to return: FALL

Shipping List

  • 1 X PWM Signal Generator + Screen


Tags: pwm, signal, generator, screen, display, serial, pwm150-mod

Also Bought

Wave 5" LCD - Pi Interface & HDMI

Wave 5" LCD - Pi Interface & HDMI

Wave 5" LCD - Pi Interface & HDMI This is a 5 inch Resistive Touch Screen LCD, HDMI interface, Designed for Raspberry Pi Quick Spec 800×480 high resolution, touch control Compatibl..

R550.00

Step Drill Kit 312, 412 & 420

Step Drill Kit 312, 412 & 420

Step Drill Kit 312, 412 & 420 This is the New HSS Steel Large Step Cone Drill Titanium Bit Set Hole Cutter, which is made from high quality HSS steel, and is Titanium coated to reduce friction an..

R100.00

Switch Snap Action with 50mm Lever

Switch Snap Action with 50mm Lever

Switch Snap Action with 50mm Lever This single-pole, double-throw (SPDT) momentary switch can be used as a general-purpose micro switch, but the 2"-long lever arm makes it especially useful as a si..

R8.95

Temp Controller + Disp - 12V

Temp Controller + Disp - 12V

Temp Controller + Disp - 12V This delicate digital display temperature controller can set start and stop temperature. The display and control temperature can be set to 0.1℃ with wide temperature cont..

R100.00

NE555 Timer Module - Adjustable Freq 7Hz - 15Khz

NE555 Timer Module - Adjustable Freq 7Hz - 15Khz

NE555 Timer Module - Adjustable Freq 7 - 15Khz The 555 timer is very a very popular timer IC. When you need a timer in a hurry, the NE555 timer module makes it so much easier.  Quick Spec ..

R13.95