USB Charger 6-24V 2A

  • Product Code: CHR-624-2A
  • Location: Y085
  • Availability: In Stock
  • R45.00 (price excl. VAT)


USB Charger 6-24V 2A

New main chip made in USA. New design, 3 solid state ceramic capacitors (MLCC). Synchronous rectification, High efficiency, 6.5V to 5V 0.7A can up to 97.5%, 12V to 5V 1A can up to 94%. Flat copper inductor, improve conversion efficiency With output overvoltage protection. There is 1.5A fuse, output 5V have 300W TVS tube protect your USB device. Using the latest USB identification circuit, perfectly compatible with IPHONE, most Android phones, IPAD's etc. High quality USB port. Output voltage indicator (RED). Input with reverse polarity protection diode, will not damage when input connected incorrect. Ultra-low static current, 0.85 mA only. Do not need to add switch when connected to a car battery, can be connected to car cigarette lighter cable or ACC power supply cable.

Quick Spec

  • Module Properties: non-isolated buck module (BUCK) synchronous rectification
  • Input voltage: DC 6-24V
  • Output voltage: 5.1-5.2V
  • Output current: 3A MAX
  • Conversion efficiency: up to 97.5% (6.5V step down to 5V 0.7A) (after short reverse protection and fuses test value)
  • Switch frequency: 500KHz
  • Output ripple: 10mV around (12V to 5V3A) 20M bandwidth
  • Output indicator: Output voltage indicator is red
  • Operating temperature: Industrial grade (-40 Celsuis to + 85 Celsuis) (the higher the ambient temperature, the lower the output power)
  • Output overvoltage protection: Yes, input 1.5A fuse, output 5V have 300W TVS tube clamp protection.
  • Full load temperature: 30 Celsuis
  • Static current: 0.85 mA
  • Load regulation: ± 1%
  • Voltage Regulation: ± 0.5%
  • Dynamic response speed: 5% 200uS
  • Output short circuit protection: Yes, but please do not short circuit for a long time
  • Input reverse polarity protection: Yes, there is reverse polarity protection diode
  • Connection mode: Soldering
  • Input mode: Soldering
  • Output mode: USB

Resources

Shipping List

  • 1 X USB Charger 6-24V 2A


Tags: USB, Charger, dc-ac, converter

Also Bought

Current Sensor -15.5A to +15.5A

Current Sensor -15.5A to +15.5A

Current Sensor -15.5A to +15.5A - ACS711 This board is a simple carrier of Allegro’s ±15.5 A ACS711 Hall effect-based linear current sensor with overcurrent fault output, which offers a low-resista..

R138.00

RFID 13.56Mhz Key Tag (Pack of 10)

RFID 13.56Mhz Key Tag (Pack of 10)

RFID 13.56Mhz Key Tag (Pack of 10) This is a blank 13.56MHz Classic 'laundry' tag - often used for laundry or identification but also found in other systems where a small proximity card is desired...

R98.00

Three pin JST connector male female ( 4 pack )

Three pin JST connector male female ( 4 pack )

Quick Specs Three pin JST connector male female with 5 inch wire outs. This cable comes fully assembled as shown and connects directly to many different Sharp sensors. Quick and easy, th..

R20.00

Screw Shield For Uno

Screw Shield For Uno

Screw Shield For Uno The Screw Shield extends all pins of the Arduino out to 3.5mm pitch screw terminals. It also has a lot of the utility provided by Arduino Protoshield, including: a large prototyp..

R83.95

ESP8266 serial WIFI Witty cloud Development Board

ESP8266 serial WIFI Witty cloud Development Board

ESP8266 serial WIFI Witty cloud Development Board This cheap and small Wifi transciever is the perfect solution for home Automation and IoT applications. It can be the replacement for your NRF24L01, ..

R149.00