Gravity: SHT31-F Digital Temperature and Humidity Sensor
The Gravity: SHT31-F Digital Temperature and Humidity Sensor delivers precise, reliable environmental readings in a compact and durable design. Built around Sensirion’s high-performance SHT31-F sensor chip, it supports I2C communication and is fully compatible with 3.3V and 5V development platforms such as Arduino, ESP32, and micro:bit.
Offering high accuracy across a wide measurement range, the sensor reads temperatures from -40°C to 125°C with ±0.2°C accuracy, and humidity levels from 0% to 100% RH with ±2% RH accuracy. Designed for demanding applications, it features built-in auto-calibration, low power consumption, and strong noise resistance for stable, long-term operation.

A pre-applied IP67-rated PTFE protective membrane shields the sensing elements from dust, moisture, and environmental contaminants, making it ideal for outdoor or industrial monitoring where exposure to water spray or high dust levels is expected. Despite this protection, the sensor maintains fast response times and accurate measurements.
The module includes a standard Gravity I2C interface and comes with both a Gravity 4-pin I2C cable and 2.54mm goldpin headers, allowing for quick integration into breadboards or final embedded systems.
Quick Spec
- Operating Voltage: 3.3V to 5.5V
- Current Consumption: < 1.5mA
- Communication: I2C (Gravity-4P interface)
- Temperature Range: -40°C to 125°C
- Temperature Accuracy: ±0.2°C
- Humidity Range: 0% to 100% RH
- Humidity Accuracy: ±2% RH (at 25°C)
- IP Rating: IP67 (Dust/water resistant membrane)
- Dimensions: 32 x 22 mm
- Mounting Hole Diameter: 3 mm
- Mounting Hole Spacing: 15 mm
Dimensions
Pinout
- SDA - Data line
- SCL - Clock Line
- GND - Negative
- VCC - Positive
- INT - Alarm Interrupt
- RST - Reset
Wiring Diagram
Resources
Shipping List
- 1 x Gravity: SHT31-F Digital Temperature and Humidity Sensor
- 1 x Gravity-4P I2C/UART Sensor Connector
- 1 x Black 2.54-2P Single Row
Gravity: SHT31-F Digital Temperature and Humidity Sensor
- Brand: DF Robot
- Product Code: SEN0334
- Weight: 0.012kg
- Product Status : Active
Stock
| Warehouse | Stock Status | Location |
|---|---|---|
| Centurion | No Stock | |
| Stellenbosch | No Stock |
We ship free of charge between branches to complete your order.
-
R198.00 (Inc Tax: R227.70)
Related Products
SHT20 Temp & Hum Module 3.3V
SHT20 Temperature & Humidity Module 3.3V The SHT20 is a low-cost, easy to use, highly accurate, digital humidity and temperature sensor. This sensor is ideal for environmental sensing and data lo..
R58.00 (Inc Tax: R66.70)
Adafruit SHT40 Temperature & Humidity Sensor - Qwiic
Adafruit SHT40 Temperature & Humidity Sensor - Qwiic Sensirion Temperature/Humidity sensors are some of the finest & highest-accuracy devices you can get. And finally, we have some that have ..
R118.00 (Inc Tax: R135.70)
SHT-40 Temperature & Humidity Sensor - Qwiic Ready
SHT-40 Temperature & Humidity Sensor - Qwiic Ready Sensirion Temperature/Humidity sensors are some of the finest & highest-accuracy devices you can get. And finally, we have some that have ..
R88.00 (Inc Tax: R101.20)
Adafruit Sensirion SHT31-D - Temperature & Humidity Sensor
Adafruit Sensirion SHT31-D - Temperature & Humidity Sensor The Adafruit Sensirion SHT31-D is a high-accuracy temperature and humidity sensor with a true I2C interface. It offers ±2% relative humi..
R245.00 (Inc Tax: R281.75)
Tags: temperature sensor, humidity sensor, sht31-f, i2c, arduino compatible, esp32, micro:bit, weather sensor, ip67, gravity sensor, dfrobot, environmental sensor, temp and humidity








