Wave Pi Pico SIM868 GSM/GPRS/GNSS Module

The Pico-SIM868-GSM/GPRS/GNSS is a GSM, GPRS, GNSS, and Bluetooth module designed for Raspberry Pi Pico. This small size and low power module will easily enable your Raspberry Pi Pico with multiple functions including making phone call, sending SMS, 2G communication, global positioning, as well as Bluetooth transmission.

Quick Spec

• Standard Raspberry Pi Pico header, supports Raspberry Pi Pico series boards
• UART communication, serial AT commands control
• Supports SMS, phone call, GPRS, DTMF, HTTP, FTP, MMS, email, etc.
• Bluetooth3.0 support allows Bluetooth data transfer
• RTC real-time clock, with rechargeable Li-Po battery
• Integrates 3.7V Li-Po battery connector and recharge circuit, allows being powered from external rechargeable Li-po battery, or recharge it in turn
• Onboard microphone, together with speaker header, can be used to make phone calls
• 2x LED indicators, for monitoring the module operating status
• Onboard nano-SIM card slot supports 2G/4G SIM card
• Working Frequency
• 2G: GSM 850/EGSM 900/DCS 1800/PCS 1900 MHz
• GNSS: GPS, GLONASS, BeiDou
• Data Transmit
• 2G (Kbps): 85.6(DL)/85.6(UL)
• Communication Protocol: TCP/UDP/HTTP/SSL/FTP/POP3/SMTP/MQTT, etc.
• Power Type: External Li-po battery OR Raspberry Pi Pico USB port
• Li-Po Battery: 3.7V ~ 4.2V
• Logic Level: 3.3V
• Module Standalone Current
• Idle Mode：12mA
• Sleep Mode：0.65mA
• Backup Mode：8uA
• Audio Input/Output: onboard microphone, with speaker header
• Indicator
• NET: Network indicator
• Charge: recharge indicator
• Switch: Li-Po battery and USB power supply switch
• SIM card: 2G SIM card (1.8V / 3V)
• Antenna Connector: LTE、GNSS、BT
• Dimensions: 76.15 × 24mm
• Net Weight: 155g

Dimensions

Resources

• Product Page
• Product Wiki
• Schematic
• Demo Code
• AT Command Manual
• sscom
• SIMCom GPS
• NetAssist

Shipping List

• 1 x Pico-SIM868-GSM/GPRS/GNSS
• 1 x LTE antenna
• 1 x GPS antenna
• 1 x Bluetooth antenna
• 2 x 20PIN female pin header
• 1 x 40PIN male pin header
• 1 x Speaker