Wave 7.3" E-Paper Display with Interface
This is an E-Ink E-Paper display HAT for Raspberry Pi and Jetson development boards. The display is a 7.3inch, 800x480 resolution, with embedded controller, communicating via SPI interface, supports red, black, yellow and white.
Due to the advantages like ultra low power consumption, wide viewing angle, clear display without electricity, it is an ideal choice for applications such as shelf label, industrial instrument, and so on.

Features:
- No backlight, keeps displaying last content for a long time even when power down
- Ultra low power consumption, basically power is only required for refreshing
- Compatible with Raspberry Pi 2B/3B/Zero/Zero W
- SPI interface, for connecting with other controller boards like Raspberry/Arduino/Nucleo, etc.
- Comes with development resources and manual (examples for Raspberry Pi/Arduino/STM32)
Quick Spec
- Operating Voltage: 3.3V/5V
- Display Colour: Red/Yellow/Black/White
- Interface: 3-wire SPI, 4-wire SPI
- Grey Scale: 2
- Full Refresh Time: 16s
- Display Size: 160 × 96m
- Refresh Power: <85mW (typ.)
- Dot Pitch: 0.2 × 0.2mm
- Standby Current: <0.01uA (almost none)
- Resolution: 800×480 pixels
- Viewing Angle: >170°
- Outline Dimension: 170.2 × 111.2mm
Dimensions
SPI Control Interface

- VCC: Power (3.3V / 5V input)
- GND: Ground
- DIN: SPI MOSI pin
- CLK: SPI SCK pin
- CS: SPI chip selection, low active
- DC: Data/Command selection (high for data, low for command)
- RST: External reset, low active
- BUSY: Busy status output pin
Resources
Shipping List
- 1 x Wave 7.3" E-Paper Display with Interface
- 1 x Driver Board and FFC cable
- 1 x PH2.0 20cm 8Pin
Wave 7.3" E-Paper Display with Interface
- Brand: Waveshare
- Product Code: W22772
- Weight: 0.151kg
- Product Status : Active
Stock
| Warehouse | Stock Status | Location |
|---|---|---|
| Centurion | No Stock | |
| Stellenbosch | Limited Stock | X shelf 3 (last 1) |
We ship free of charge between branches to complete your order.
-
R1,358.00 (Inc Tax: R1,561.70)
Related Products
Pi 7.5" Display E-Ink 640X384 - 3 Colour
Pi 7.5" Display E-Ink 640X384 - 3 Colour This is an E-Ink display HAT for Raspberry Pi, 7.5inch, 640x384 resolution, with embedded controller, communicating via SPI interface, supports red, black, an..
R896.45 (Inc Tax: R1,030.92)
Wave 5.65" e-Paper Display - 7 Colour
Wave 5.65" e-Paper Display - 7 Colour This is an E-Ink raw display, 5.65inch, 600x448 resolution, with embedded controller, communicating via SPI interface, supports 7 colours. Due to the advantages ..
R1,365.00 (Inc Tax: R1,569.75)
Wave 4" 7-Colour e-Paper Display
Wave 4" 7-Colour e-Paper Display This is This 4.01inch Colorful E-Paper E-Ink Display HAT For Raspberry Pi ACeP 7-Colour ((Advanced Colour ePaper), 640×400 Pixels resolution, communicating via SPI in..
R768.00 (Inc Tax: R883.20)
Wave 2.15" E-Ink Display - Red/Black/White
Wave 2.15" E-Ink Display - Red/Black/White The Wave 2.15" E-Ink Display is a low-power, high-contrast module that mimics traditional printed paper. With a 296×160 resolution and support for red, bl..
R258.00 (Inc Tax: R296.70)
Tags: wave, 7.3", 7.3inch, e-ink, eink, e-paper, epaper, display, 800x480, 4 colour, hat, spi interface







