18B20 Sensor - Mounting Hole - 1M

This is a mountable version of the DS18S20 Temperature sensor. The sensor has a flat plate with a 8.5mm diameter hole which will allow you to securely mount the sensor on any flat surface .Handy for when you need to measure something far away, or in wet conditions. While the sensor is good up to 125°C the cable is jacketed in PVC so we suggest keeping it under 100°C. Because they are digital, you don't get any signal degradation even over long distances! The DS18S20 provides 9 to 12-bit (configurable) temperature readings over a 1-Wire interface, so that only one wire (and ground) needs to be connected from a central microprocessor.Usable with 3.0-5.5V systems. Because each DS18S20 contains a unique silicon serial number, multiple DS18S20s can exist on the same 1-Wire bus. This allows for placing temperature sensors in many different places. Applications where this feature is useful include HVAC environmental controls, sensing temperatures inside buildings,equipment or machinery, and process monitoring and control.With our plug-able terminal, there is no soldering required to connect to our IO Expansion Shield.

Quick Spec

  • Usable with 3.0V to 5.5V power/data
  • ±0.5°C Accuracy from -10°C to +85°C
  • Usable temperature range: -55 to 125°C
  • 9 to 12 bit selectable resolution
  • Uses 1-Wire interface- requires only one digital pin for communication
  • Unique 64 bit ID burned into chip
  • Multiple sensors can share one pin
  • Temperature-limit alarm system
  • Query time is less than 750ms
  • 3 wires interface:
    • Red wire - VCC
    • Green wire - GND
    • Yellow wire - DATA
  • Stainless steel plated: 25 x 14.6mm
  • Cable diameter: 5 AWG (4.6mm)
  • Length: 1M
  • Weight: 47g

Resources

Shipping List

  • 1 x 18B20 Sensor - Mounting Hole - 1M


18B20 Sensor - Mounting Hole - 1M

  • Brand: Generic
  • Product Code: 18B20-HOLE-1M
  • Stock

    Warehouse Stock Status Location
    Centurion Out Of Stock 0
    Stellenbosch In Stock C0204
  • R88.00 (Inc Tax: R101.20)


Related Products

Temperature Sensor - DS18B20 - 1M

Temperature Sensor - DS18B20 - 1M

Temperature Sensor - 18B20 - 1M Lead This is a waterproofed version of the DS18B20 Temperature sensor. Handy for when you need to measure something far away, or in wet conditions. While the sensor ..

R60.00 (Inc Tax: R69.00)

DHT 22 module - Hum and Temp

DHT 22 module - Hum and Temp

DHT 22 module - Hum and Temp The DHT22 is a basic, low-cost digital temperature and humidity sensor. It uses a capacitive humidity sensor and a thermistor to measure the surrounding air and spits o..

R140.00 (Inc Tax: R161.00)

18B20 Digital Temp Sensor - 5 Meter

18B20 Digital Temp Sensor - 5 Meter

Temperature Sensor - DS18S20 - 5M Lead This is a waterproofed version of the DS18S20 Temperature sensor. Handy for when you need to measure something far away, or in wet conditions. While the senso..

R108.00 (Inc Tax: R124.20)

DHT11 Densor

DHT11 Densor

DHT11 Sensor The DHT11 is a basic, ultra low-cost digital temperature and humidity sensor. It uses a capacitive humidity sensor and a thermistor to measure the surrounding air, and spits out a digi..

R25.00 (Inc Tax: R28.75)

18B20 Temperature Module

18B20 Temperature Module

18B20 Temperature Module This is an electronic thermometer which has high accuracy over a wide range (accurate to ±0.5°C over the range of -10°C to +85°C). You can locate these thermometer chips up t..

R50.00 (Inc Tax: R57.50)

18B20 to -92 Temperature Sensor Chip

18B20 to -92 Temperature Sensor Chip

18B20 to -92 Temperature Sensor Chip The DS18B20 temperature sensor provides 9 to 12–bit centigrade temperature measurements and has an alarm function with nonvolatile user-programmable upper and low..

R50.00 (Inc Tax: R57.50)

18B20 Sensor - Mounting Hole - 5M

18B20 Sensor - Mounting Hole - 5M

18B20 Sensor - Mounting Hole - 5M This is a mountable version of the DS18S20 Temperature sensor. The sensor has a flat plate with a 8.5mm diameter hole which will allow you to securely mount the se..

R195.00 (Inc Tax: R224.25)

18B20 Sensor - Flat 30cm

18B20 Sensor - Flat 30cm

18B20 Sensor - Flat 30cm This is a flat probe version of the DS18S20 Temperature sensor. The sensor has a 20 x 7.5 x 3.5mm flat plate with allowing for more surface area .Handy for when you need to..

R118.00 (Inc Tax: R135.70)

18B20 Temp Sensor Mini Display - Red

18B20 Temp Sensor Mini Display - Red

18B20 Temp Sensor Mini Display - Red This is an 18B20 Temperature probe that comes with a display for display the temperature readings. The module uses the latest A/D conversion chip and hig..

R125.00 (Inc Tax: R143.75)

Tags: 18b20, ds18b20, temp, temperature, sensor, smd, mounting, mount, hole, 1m, tem, blue, cable, 8.5mm, nut, probe