• L298 Dual 2A H-Bridge Motor Driver

L298 Dual 2A H-Bridge Motor Driver

This is a simple dual DC motor driver based on the proven L298N dual h-bridge IC. You can drive this board directly from your Arduino(TTL level signaling) and it allows you to control direction (and speed if you PWM the enable pin!) separately of 2 DC brushed motors at up to 2A and 35VDC per channel.

It is also possible to bridge both channels and be able to drive up to 4A output.

Quick Spec

  • Dual H-Bridge Driver
  • IC: L298N (ST),/li>
  • Logic voltage: 5VDC (has onboard 5V regulator if you would like to power from 12V)
  • Drive voltage: 5-35VDC
  • Drive current: 2A (MAX single bridge)
  • Max power dissipation: 25W
  • Dimensions: 43 x 57mm

Board Layout

L298-MOD-011

The onboard 78M05 voltage regulator, can provide a stable working supply voltage to L298N. NOTE: The VS voltage must be >= 7V DC for the 78M05 to regulate correctly.

The W1 jumper connects the VS and VSS input pins such that VS = VSS, if your VS input voltage exceeds 7V, disconnect W1 jumper, then the 78M05 voltage regulator will provide a 5V supply on the VSS pin. This is useful for example, to power your arduino (with 5V from the VSS pin) when the input voltage is above 7V on the VS pin (E.G. 12V or 24V battery system).

Onboard control direction indicator and power indicator LEDs.

Wiring up with an Arduino is simple. You can follow this Tutorial.

In a few short words, you connect your motor power supply to the 12V and GND wire blocks, and then connect your Arduino ground to GND.
Next you connect your DC motor to OUT1; OUT2 and then connect 3 output pins on your Arduino to ENA, IN1, IN2. (make sure these are all LOW in your code before turning motor power on).
Now you set IN1 or IN2 HIGH to change direction(both high or low will cause the motor to brake) and finally pull ENA high to start moving (ENA low will allow the motor to freely move without power).

Resources

Shipping List

  • 1 x L298 Dual 2A H-Bridge Motor Driver


L298 Dual 2A H-Bridge Motor Driver

  • Brand: Generic
  • Product Code: L298-MOD
  • Weight: 0.027kg
  • Product Status : Active
  • Stock

    Warehouse Stock Status Location
    Centurion No Stock
    Stellenbosch No Stock
    Bulk Location No Stock

    We ship free of charge between branches to complete your order.

  • R39.00 (Inc Tax: R44.85)


Related Products

BTS7960 Power H-bridge 43 Amp Module

BTS7960 Power H-bridge 43 Amp Module

BTS7960 Power H-bridge 43 Amp Module Introducing the Double BTS7960 H-Bridge Motor Driver - capable of handling large currents up to 43A, providing efficient and reliable control for your high-power ..

Centurion (No Stock)
Stellenbosch (No Stock)
Bulk Location (No Stock)
Part No: BTS7960
Product Status : Active

R160.00 (Inc Tax: R184.00)

BTS7960 High Power H-Bridge motor driver 43A

BTS7960 High Power H-Bridge motor driver 43A

BTS7960 High Power H-Bridge motor driver 43A The Motor Driver 43A BTS7960 uses an H-bridge driver module that composed by Infineon power drive chip, with overheating and overcurrent protection. Doubl..

Centurion (No Stock)
Stellenbosch (No Stock)
Bulk Location (No Stock)
Part No: CJMCU-7960
Product Status : Active

R229.00 (Inc Tax: R263.35)

L298N Mini H-bridge dual motor driver

L298N Mini H-bridge dual motor driver

L298N Mini H-Bridge dual motor driver This Dual H-bridge motor driver, can drive two DC motors or a 4-wire two-phase stepper motor. With built-in TSD, you don't have to worry about motor stall Its ul..

Centurion (In Stock)
Stellenbosch (In Stock)
Bulk Location (No Stock)
Part No: L298M-MINI
Product Status : Active

R25.00 (Inc Tax: R28.75)

High Speed H-Bridge 5A Module

High Speed H-Bridge 5A Module

HIGH Speed H-Bridge 5A Module The 33886 is a monolithic H-Bridge ideal for fractional horsepower DC-motor and bi-directional thrust solenoid control. The IC incorporates internal control logic, charg..

Centurion (In Stock)
Stellenbosch (In Stock)
Bulk Location (No Stock)
Part No: MC33886-MOD
Product Status : Active

R232.00 (Inc Tax: R266.80)

Makerbase SimpleFOC BLDC Controller

Makerbase SimpleFOC BLDC Controller

Makerbase SimpleFOC BLDC Controller SimpleFOC is an Arduino-compatible opensource FOC project. After many years of contributions from developers, it has become very mature in low-power BLDC applicati..

Centurion (In Stock)
Stellenbosch (No Stock)
Bulk Location (No Stock)
Part No: MKS-SIMPLE-FOC
Product Status : Active

R435.00 (Inc Tax: R500.25)

Makerbase ESP32 Dual SimpleFOC Motor Controller

Makerbase ESP32 Dual SimpleFOC Motor Controller

Makerbase ESP32 Dual SimpleFOC Motor Controller The MKS ESP32 FOC driver board is a versatile and affordable solution for brushless DC motor control. It features the ESP32 WROOM 32D for enhanced stab..

Centurion (In Stock)
Stellenbosch (In Stock)
Bulk Location (No Stock)
Part No: MKS-ESP32-FOC
Product Status : Active

R525.00 (Inc Tax: R603.75)

DRV8871 DC Motor Driver - 3.6A

DRV8871 DC Motor Driver - 3.6A

DRV8871 DC Motor Driver - 3.6A This versatile driver handles motor power voltages from 6.5V to 45V and supports logic levels up to 5.5V on IN pins. With a peak current of 3.6A and PWM control, it o..

Centurion (In Stock)
Stellenbosch (In Stock)
Bulk Location (No Stock)
Part No: DRV8871-MOD
Product Status : Active

R138.00 (Inc Tax: R158.70)

Tags: l298n, dual channel, 2 way, 2a, h-bridge, hbridge, motor, driver, dc